|
07-13-2016, 07:40 PM
|
|
I'm kind of a big deal
|
|
Join Date: Nov 2009
Posts: 4,848
|
|
Quote:
Originally Posted by Neverendingproject
Well I picked up the lift today and I think I lucked out, I didn't look close at the pictures I was sent and it turns out that I just scored a 5" RCD lift instead of the superlift I was expecting!
|
Nice. Pay attention to the front axle drop bracket. It needs to be reinforced if they haven't already.
Bottom left bracket in this pic. Look it over good cause it is known to crack up at the top.
image-2116164206.jpg
Also what year is your truck?
Last edited by camodown; 07-13-2016 at 07:50 PM.
|
Register and never see these ads again. |
|
07-13-2016, 09:32 PM
|
Ford Ranger Owner
|
|
Join Date: Apr 2014
Posts: 70
|
|
Re: Superlift with coilover
It has a brace welded to it already but the weldsame are rather shifty so I thinking I will cut it off and redo it. My truck is a 99 supercab xlt model
|
07-14-2016, 06:46 AM
|
|
I'm kind of a big deal
|
|
Join Date: Nov 2009
Posts: 4,848
|
|
Quote:
Originally Posted by Neverendingproject
It has a brace welded to it already but the weldsame are rather shifty so I thinking I will cut it off and redo it. My truck is a 99 supercab xlt model
|
Ok. You will be fine on rotor size.
|
07-14-2016, 08:39 AM
|
Ford Ranger Owner
|
|
Join Date: Apr 2014
Posts: 70
|
|
Re: Superlift with coilover
Not going to use them because they are from am expo but the guy sold it to me with the whole front end attached still, hubs rotors, calipers, extended brake lines, and even the cv axles
----------
One things I didn't notice u till I got home unfortunately is that is didn't come with the yoke for the front drive shaft to bolt to the transfer case. Do you happen to know what yoke is needed for that? Was trying to find the superlift p/n's but can find it separate from the entire shaft. If not I will take it down to my local 4x4 shop and see if they can get one.
|
07-14-2016, 01:01 PM
|
|
I'm kind of a big deal
|
|
Join Date: Nov 2009
Posts: 4,848
|
|
I'm guessing you need this part?
image-2154870363.jpg
This was the part number for that part when people built their own front shafts
Neapco CV Flange adapter N2-83-288X (Ford CV 6 bolt)
|
07-14-2016, 04:19 PM
|
Ford Ranger Owner
|
|
Join Date: Apr 2014
Posts: 70
|
|
Re: Superlift with coilover
Yeah thats the one. finding parts diagrams with some 1354 transfer cases that have a normal u-joint yoke. Think it would be a direct fit if I took that 6 bolt mount out and got a yoke from a junkyard off another transfer case? Not sure if the innards are the same?
|
07-14-2016, 05:35 PM
|
|
Ford Ranger Driver
|
|
Join Date: Feb 2012
Posts: 2,172
|
|
Quote:
Originally Posted by Neverendingproject
Yeah thats the one. finding parts diagrams with some 1354 transfer cases that have a normal u-joint yoke. Think it would be a direct fit if I took that 6 bolt mount out and got a yoke from a junkyard off another transfer case? Not sure if the innards are the same?
|
You would have to split the case open to swap output shafts. It'd be easier to just pick up the neapco adapter. I got mine from northern drivetrain for around 150 bucks.
__________________
2002 Ford Ranger XLT 4x4, ext. cab, 4.0L v6
Superlifted 33x12.5 Duratracs
1995 Ford Ranger STX 4x4 ext. cab 4.0l v6 SOLD
|
07-14-2016, 06:23 PM
|
Ford Ranger Owner
|
|
Join Date: Apr 2014
Posts: 70
|
|
Re: Superlift with coilover
That's what I was afraid of, looks like I'll be buying the adaptor and some lift springs here shortly then I'll start a build thread once I get going on installing everything.
|
07-14-2016, 06:26 PM
|
|
I'm kind of a big deal
|
|
Join Date: Nov 2009
Posts: 4,848
|
|
Quote:
Originally Posted by Neverendingproject
That's what I was afraid of, looks like I'll be buying the adaptor and some lift springs here shortly then I'll start a build thread once I get going on installing everything.
|
Welcome to lifting. There is always something else to buy.
|
07-14-2016, 06:29 PM
|
|
Ford Ranger Driver
|
|
Join Date: Feb 2012
Posts: 2,172
|
|
Quote:
Originally Posted by camodown
Welcome to lifting. There is always something else to buy.
|
^^. This. Lol.
__________________
2002 Ford Ranger XLT 4x4, ext. cab, 4.0L v6
Superlifted 33x12.5 Duratracs
1995 Ford Ranger STX 4x4 ext. cab 4.0l v6 SOLD
|
07-16-2016, 10:39 AM
|
Ford Ranger Owner
|
|
Join Date: Apr 2014
Posts: 70
|
|
Re: Superlift with coilover
Can anyone running the FR36s springs let me if they will fully compress with stock shacoles or will I have to get longer shackles to prevent binding?
|
07-16-2016, 01:49 PM
|
|
I'm kind of a big deal
|
|
Join Date: Nov 2009
Posts: 4,848
|
|
Quote:
Originally Posted by Neverendingproject
Can anyone running the FR36s springs let me if they will fully compress with stock shacoles or will I have to get longer shackles to prevent binding?
|
No issues.
|
07-16-2016, 05:44 PM
|
Ford Ranger Owner
|
|
Join Date: Apr 2014
Posts: 70
|
|
Re: Superlift with coilover
Great, gonna be ordering a set this week and want to make sure I get everything I need.
|
07-17-2016, 10:27 PM
|
Ford Ranger Owner
|
|
Join Date: Apr 2014
Posts: 70
|
|
Re: Superlift with coilover
ok ordering my fr36s springs now, who is running them and what shocks do you run with them? not looking to spend a lot of money on shocks but don't wanna buy crap shocks that don't work for shit.
|
07-20-2016, 06:53 PM
|
Ford Ranger Owner
|
|
Join Date: Apr 2014
Posts: 70
|
|
Re: Superlift with coilover
Well all parts are on order. Got my springs and shocks. Waiting on new my new front hubs, wheel seals, hubs seals and front axle retainer clips, should be getting started on the lift sometime next week.
|
Thread Tools |
Search this Thread |
|
|
|
|