anybody here have the summit bl kit? id like one because they are alot cheaper than PA kits. the site says 98-00 but will it work for an 04? anything different i would have to do if i get the 98-00 kit? thanks

__________________
2004 ford ranger 2.3 2wd. flowmaster 40. sony xplode head unit. 30x9.50x15 turbostar ATs. stock jeep wrangler wheels, painted black. ebay taillights. few more cosmetic upgrades

I've got one.. Same thing as the performance acessories kit, just cheaper piece and summits name on it. It'll fit on your year and model truck as well.

__________________
2001 Ford Ranger Supercab (4dr), Oxford White, 4.0 Sohc, 4x4, Manual trans (hurst equipped), 4:10's, 3" body lift.

I got a 98-00 summit lift on my 05

Only thing we had to modify was the fuel filler neck.

Here is what we came up with on my 05 for the fuel neck. We cut the hose in half then went to lowes and got a 4.5" long pipe threaded on both ends. it is 1" in diameter. Cost like 2 dollars
[/B]






Now when on the truck we pushed it all the way till it was touching the stock metal part that comes down and then put the hose clamp right at the edge of the pipe. There is still at least 1.5" after the hose clam on the tank side[/B]

__________________

Will it work on 1996 2wd.

__________________
1996 Ranger XLT reg cab 2wd
2.3 and 5spd
3 inch PA body lift & new stock bushings
Flowmaster Delta 40 muffler
New 15 Outlaw wheels
No mods to the motor yet

^yes

__________________
2001 Ford Ranger Supercab (4dr), Oxford White, 4.0 Sohc, 4x4, Manual trans (hurst equipped), 4:10's, 3" body lift.

thanks guys im gonna go ahead and order the summit kit then

__________________
2004 ford ranger 2.3 2wd. flowmaster 40. sony xplode head unit. 30x9.50x15 turbostar ATs. stock jeep wrangler wheels, painted black. ebay taillights. few more cosmetic upgrades

I forgot to add

you may also need to modify the bumper brackets on the rear. just have to enlarge the holes some

__________________

sounds easy enough just to enlarge the holes,, i got a guy thats goin to help me hes got all the tools you can think of so it should go pretty smoothly, thanks

__________________
2004 ford ranger 2.3 2wd. flowmaster 40. sony xplode head unit. 30x9.50x15 turbostar ATs. stock jeep wrangler wheels, painted black. ebay taillights. few more cosmetic upgrades

I have one on my 08. The fuel/vent hose extensions were totally wrong. And the issue with the rear bumper bracket

__________________
2008 Ranger FX4
A bit of everything

How did u correct the fuel filler neck?

__________________

I installed the Summit kit on my truck and also had the wrong filler tubes with it and also had to modify my rear bumper brackets but when we got the kit for Tiffany's truck we went with the more expensive kit and had no issues at all and it even came with 2 sizes of filler neck tubes so I corrected mine as well.

The PA body lift bumper brackets can be purchased direct from PA for 14.99 a piece. They will ship for free to a body shop. I did that when I was rear ended.

__________________

so do you think it would be worth it to just go ahead and order PA brackets so its easier or just enlarge the summit brackets holes

__________________
2004 ford ranger 2.3 2wd. flowmaster 40. sony xplode head unit. 30x9.50x15 turbostar ATs. stock jeep wrangler wheels, painted black. ebay taillights. few more cosmetic upgrades

IMO would be easier to order the brackets.

We tore the piss out of my drill press and drill making the holes larger.

__________________

Got a hose that went over the stock one instead of into it. When pumping gas I could only let the nosel pray half or it would click off

__________________
2008 Ranger FX4
A bit of everything