|
|
|
|
03-14-2011, 12:17 PM
|
Learning to use the forums
|
|
Join Date: Mar 2011
Posts: 3
|
|
Mazda B3000 2x4 to 4x4?
Hey guys Im Dustin and Im a Proud owner of a 1999 Mazda B3000
currently have been recovering truck from a recent hit and run luckily it was just the bed that got hit. I had a few questions considering im new to this. Ok well Ive had this truck for a good while and getting rid of it is not an option its part of my family but i really wanted to make it into a 4x4 i didnt know if i could just find a 99 ranger 4x4 junker and use the front end but I dont know anything on what to get except ill need a transfer case possibly a new transmission and front differential but besides that i dont know anything. please help and thanks!
__________________
1999 Mazda B3000 v6 3.0
No current mods but about to start my journey.
Just took bed off to get a new one (stepside or 7ft) got t-boned bed took all damage and isn't in too bad condition but a major eye site so replacing would be alot more expensive to repair. Going to add 3in suspension lift no sure on brand yet and already have d-2 dick rims 15in with Goodyear tires not installed yet. Not sure on anything else yet...
|
|
|
|
Register and never see these ads again. |
|
03-14-2011, 12:20 PM
|
|
Needs moar chrome....
|
|
Join Date: Dec 2010
Posts: 1,318
|
|
Re: Mazda B3000 2x4 to 4x4?
Thats a far way man, unless its the Dual Sport, your gonna have to change your front suspension also. Theres alot into doing a 4x4 conversion, put a locker in it and be done best way to get 4x4 output without the full conversion.
But welcome fellow Mazda owner
__________________
2001 Mazda B-3000 CabPlus "FX2 Off Road"| 3.0 | 5 SPD | 3 In Spindle Lift | Belltech Shackles | UltraGauge |Alpine Head / 10" Kicker Setup | Air Box Mod | Add-A-Leaf| Thrush Welded B4 Rear Wheel | Kobalt Box | Cobra 19 DX IV | Custom PA Speaker | Front/Rear Tow Receiver | 2X Aux Lights | Hideaway Strobes | Back Rack Safety Rack | Amber LED Strobes | Blue LED Strobes | 265/75/R16 General Grabber AT2's
Quote:
Originally Posted by Clinton
I like little girls...........
|
RIP Jason
|
03-14-2011, 12:26 PM
|
Learning to use the forums
|
|
Join Date: Mar 2011
Posts: 3
|
|
Re: Mazda B3000 2x4 to 4x4?
Was planning on getting a suspension lift for it so suspension wasn't a prob but just was wandering what i may or may not need im just confused on it. was just going to leave it a 2wd but dad and I are looking for a project.
__________________
1999 Mazda B3000 v6 3.0
No current mods but about to start my journey.
Just took bed off to get a new one (stepside or 7ft) got t-boned bed took all damage and isn't in too bad condition but a major eye site so replacing would be alot more expensive to repair. Going to add 3in suspension lift no sure on brand yet and already have d-2 dick rims 15in with Goodyear tires not installed yet. Not sure on anything else yet...
|
03-14-2011, 12:39 PM
|
N/A
|
|
Join Date: Jan 2011
Posts: 9,031
|
|
Re: Mazda B3000 2x4 to 4x4?
a good project would be taking your 3.0L and adding a 2 to the end (302)
|
03-14-2011, 12:44 PM
|
Welcome to FRF!
|
|
Join Date: Oct 2010
Posts: 8,954
|
|
Re: Mazda B3000 2x4 to 4x4?
As was said, the suspension is ENTIRELY different at the front. 4x4's, Dual Sports, Edge Rangers, and 06+ Sport Rangers have torsion bars. 4x2 Mazdas, and 4x2 Rangers without the Edge or Sport package are coil sprung. If your truck is coil sprung, then you do not have the necessary mounting points to bolt in the front D35. This is an easy swap if your truck is a Dual Sport, but if not, you're looking at a frame swap to gain 4x4.
|
03-14-2011, 01:00 PM
|
|
Ford Ranger Driver
|
|
Join Date: Feb 2011
Posts: 1,206
|
|
Re: Mazda B3000 2x4 to 4x4?
exactly what he said^
__________________
2004 4.0 4x4 5spd xlt with 175k 4.10 axles, extended cab, cranked t-bars (not maxed), painted black interior, 32x11.5x15 bfg a/t and procomp steel rims
60/40 mod with a shorty console
|
03-14-2011, 01:41 PM
|
|
...............
|
|
Join Date: May 2009
Posts: 23,399
|
|
Re: Mazda B3000 2x4 to 4x4?
Welcome to FRF
Be sure to post tech questions in the correct section.
__________________
2005 Edge
|
03-14-2011, 02:14 PM
|
|
That sums it up!
|
|
Join Date: Oct 2009
Posts: 1,198
|
|
Re: Mazda B3000 2x4 to 4x4?
Welcome
__________________
1999 XLT 4X4 4.0 Auto
3" BL, T-bar crank, 6400 shackles & 33" BFG AT KO's
More mods to come...
|
03-14-2011, 02:59 PM
|
Learning to use the forums
|
|
Join Date: Mar 2011
Posts: 3
|
|
Re: Mazda B3000 2x4 to 4x4?
Lol well until I look into it more I believe I'm sticking with 2wd for now and getting a suspension lift make things a little easier for now until I have more time and money. Thanks guys
__________________
1999 Mazda B3000 v6 3.0
No current mods but about to start my journey.
Just took bed off to get a new one (stepside or 7ft) got t-boned bed took all damage and isn't in too bad condition but a major eye site so replacing would be alot more expensive to repair. Going to add 3in suspension lift no sure on brand yet and already have d-2 dick rims 15in with Goodyear tires not installed yet. Not sure on anything else yet...
|
03-14-2011, 07:41 PM
|
|
Old man driver.
|
|
Join Date: Nov 2009
Posts: 14,894
|
|
Re: Mazda B3000 2x4 to 4x4?
welcome to FRF, Dustin!
__________________
2001 Ranger Edge 4x4 (sold)
2006 F150 Lariat 4x4 (sold)
2007 Explorer XLT (Destroyed by Deer on highway)
2014 Explorer XLT (inherited from parents)
|
03-16-2011, 05:19 AM
|
Banned
|
|
Join Date: Mar 2010
Posts: 14,046
|
|
Re: Mazda B3000 2x4 to 4x4?
Welcome
|
10-18-2015, 07:56 PM
|
Learning to use the forums
|
|
Join Date: Oct 2015
Posts: 3
|
|
Re: Mazda B3000 2x4 to 4x4?
I also have a 1999 mazda b3000 dual sport. This was my uncles truck that passed away. It does have a sentimental value too it and i have no money in it.... What all would i need to change this from a 2x4 to a 4x4. I am buying a new truck this next year and i just want to convert this mazda just for hunting purposes.
__________________
1999 Mazda B3000 Troy Lee design Dual Sport
|
|
|
|
10-18-2015, 08:15 PM
|
Welcome to FRF!
|
|
Join Date: Oct 2010
Posts: 8,954
|
|
Re: Mazda B3000 2x4 to 4x4?
Parts List
-Transmission (obviously 4x4)
-Transfer case
-D35 IFS front axle(w/ matching gears)
-Front driveshaft to match transfer case flange
-Floor shifter assembly (cage, shift lever, floor plate, etc.)
-4x4 steering knuckles
Of course you will need to buy new stuff like CV axles, bearing assemblies, and brake rotors.
There are some things that are year dependent, like the size of the brakes, and whether you want PVH hubs which suck (but can be used to convert to aftermarket lockout hubs). Othwerwise you'll have a live axle setup that always spins like every other 01+ Ranger.
And then most importantly, there is the third mounting bracket for the front axle that supports the pinion side of the differential. Some trucks have it already on the frame, most trucks do not. You will need to weld a bracket to the frame to support the rear of the diff. When you weld this bracket to the frame, you have to make sure you set the pinion angle correctly or else you'll have some less than good vibrations.
I'm probably forgetting a few things, but that's the gist of it. This topic has been beaten to death, so you're not going to get much help on it. Do some more research to make sure you really understand what you're getting into. It's not complicated, but it's not something everybody should go through with.
|
|
|
|
10-19-2015, 10:35 AM
|
|
Another old fart
|
|
Join Date: Oct 2013
Posts: 7,486
|
|
Re: Mazda B3000 2x4 to 4x4?
Dustin, welcome to FRF.
__________________
2000 Ranger Extd Cab XLT, 4X4 Off Road, 4.0L, Auto, 8.8 - 4.10's, 01 grille & lights swap.
69 Mustang, modified 5.0, & 5spd.(project)
99 Explorer Sport, 4.0 SOHC, Auto, 8.8 - 4.10's, PW, PL, PM, Cruise, Tilt. (Wife's DD)
05 F-150 2WD Regular Cab. ( My DD)
|
10-20-2015, 04:27 PM
|
Learning to use the forums
|
|
Join Date: Oct 2015
Posts: 3
|
|
Re: Mazda B3000 2x4 to 4x4?
thank you fordzilla i really appreciate your response. not something i have fully decided to do yet but not something i am looking to do in a hurry right now i just drive it to woods and drive around. will prob put a wench on the front for a while and over a year or so get parts here and there to do it. i see supposedly the truck is already set up like a 4x4 minus it just not being one... so far as the front suspension and clearance and skid plates.
__________________
1999 Mazda B3000 Troy Lee design Dual Sport
|
Thread Tools |
Search this Thread |
|
|
|
|