Quote:
Originally Posted by rmccann93
u should only have to pull your main trim off the dash and the take the cover off under the steering wheel by your knees and if u have a metal plate behind it take that off as well. if u have tilt steering just put it in the down position but if not take the 2 bolts off that hold the whole steering colum up and let if hang. then just undo the few screws holding it down to the dash and pull it out a iittle so u can reach behind the cluster and undo the speedo cable. feel for the plastic clip. u just have to squeeze it and pull the cluster forwarrd and it should pop out. now u can unplug the other clips on the back of the cluster. thats all i had to do at least. hope this helps a little
|
Is that the same for a 3rd gen ranger as well?
__________________
1993 XLT 2.3 Single cab 2wd
Used to be lifted, but now low and slow. Flipped hangers and cut coils up front for 2/2 drop. Soon to be 3/4, 17x8, 235/45/17 up front, 245/45/17 in the rear 300K+ miles
My Build Thread:[url]http://www.fordrangerforum.com/project-logs/89577-jldanger-rangers-build-thread.html[/url
|