Re: Change a 40/60 for bench seat in '02?
03-05 explorer seats will not fit in a ranger unless they come from an explorer sport (2 door) or sport trac. and i think the cut off for that was 04. 95-01 explorers work with minor work. just make a couple holes larger. stuff on the sticky list applies to 93-7 only. however, you can adapt them to work in a 98+ by getting a set of explorer or 93-7 ext cab ranger tracks. this works for 98+ ext cabs. 98+ reg cabs need a set of 93-7 reg cab tracks to use the seats on the list.
now as far as a bench seat, you can use a gen 1-3 ranger reg cab bench seat. you will need a set of 93-7 reg cab ranger bench seat tracks. the front two holes should line up, then you just drill two holes for the rear. the biggest issue you will face is how to mount the seat belts.
98+ seat tracks aren't a simple unbolt like the 97 and olders were. the track assembly and recline mech are built as one unit. so reusing the tracks and swapping them over won't work.
__________________
Krylon Fusion is for Amateurs.
Last edited by drppdyllwrngr; 02-28-2013 at 03:36 AM.
|