I want to put some LED's in my truck but I want them to turn on and off when I open the doors not have to switch them on. I think I would have to wire it to the rubber door open and close wire? Any Ideas?

__________________
[FONT="Fixedsys"]2001 Ford Ranger Edge
Nerf Bars
12" JL W1
JL V2 Slash class D amp
Kenwood Head Unit
Cobra CB Radio/ W PA
Cobra Radar Detector (Cord hidden
in the roof)
HID Headlights + LED Eyebrows
And of course my NRA sticker and CSA Battle Flag
5% Window Tint[/FONT]

Tap into the domelight?

__________________
Sold:2004 XLT 4x2 Ext. Cab. 3.0 Mods: 3" spindle, AAL, shackle, 32x11.5 on 15x8s, billet grille, clear corners, flow 40 dumped, line-x, CB/PA, traction bars, lil sound system, auto up down windows
Sold:2005 XLT 4x4 Ext. Cab. 4.0 Mods: ProComp lights w/ HID swap on tabs, 32x11.5 on 15x8s, CB/PA, black out heads/corners, lil sound system, cranked t-bars, flow 40 dumped, line-x, shell, bed rug, 06+ tails, metal tail gate handle since plastic one shattered, OHC, Mustang Dome.

i sell them if you wanna good deal

What all you selling 91?

I woulds suggest door switch or dome light and lean toward the dome light if it also has an on / off switch.

I like being able to turn stuff off when not needed.

dave

__________________
White 2001 Ford Ranger Edge - step side- ext cab - 3.0 V-6 2-WD 88k

I have determined that most mechanical / electrical challanges are directly connected to the nut that connects the steering wheel to the drivers seat.

Led lights. In all colors

__________________
1991 RANGER 4X4 4.0
3'' LIFT,CB

Tap into the courtesy ligth and what are you wanting to run? Ive got Streetglow all around and install them as a second job. Even got a partial sponsorship that allows me to get Streetglow for cheap if you are looking to get the Streetglow stuff.

__________________
2003 Ford Ranger Edge 3.0L Vulcan Auto Tranny
MAC Performance Ram Air Intake
Flowmaster Super 44 w/ tailpipe before the wheel
Interior and Exterior LED w/ music interface
Ford Racing front and rear Sway Bars
Limited Slip with 4.10 gears

http://www.cardomain.com/ride/3114321

And I would advise putting in a additional switch if the po po are really hard on if they can see lots of interior leds on at night. I know Ive got a full setup on turning the visible interior leds on and off aside from the others cuz the cops are ticket happy with lights. Just throw an extra switch in that will allow you to use the courtesy light without the leds coming on while driving.

Heres my simple wiring setup that most of my customers go with...

__________________
2003 Ford Ranger Edge 3.0L Vulcan Auto Tranny
MAC Performance Ram Air Intake
Flowmaster Super 44 w/ tailpipe before the wheel
Interior and Exterior LED w/ music interface
Ford Racing front and rear Sway Bars
Limited Slip with 4.10 gears

http://www.cardomain.com/ride/3114321

the best way to do this is with transistors. I did this on my Evo and my 04 Edge with great success. All you need is one transitor per door and a diode per door also. I have a detailed post on RF called "Door switch lighting idea" I'm busy making a tune for an sr20 right now or I'd post more details.

__________________
Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend.