Does anyone know how to remove the interior panel and plastic behind the seats where the speakers are attatched to? There are little plastic circles and I dont know if they pop out or what. I need to hide some wires behind the covers and I can't figure out how to remove them. Just wondering if there is a way to do so without breaking anything Thanks for any help.

Those are push pins and they like to break when you remove them, I would try to just tuck the wires under the edges...

__________________
22 and counting...

Crap........ I cant just tuck it under though lol. Hmmmmmmmm.........

Order a bunch of the push pins that way you can put new ones in if they break.

__________________
2003 Ford Ranger Edge 3.0L Vulcan Auto Tranny
MAC Performance Ram Air Intake
Flowmaster Super 44 w/ tailpipe before the wheel
Interior and Exterior LED w/ music interface
Ford Racing front and rear Sway Bars
Limited Slip with 4.10 gears

http://www.cardomain.com/ride/3114321

Pictures of these pieces?

__________________
Mods: Xcal 2, K&N Drop-In, Line-X, DSG Heads/Corners, 6000k Hi/Low HID's, 6K HID Fogs, Foglight Mod, Throttle Cable Mod, 6.5" Digital Designs, Rockford P400.4, 2 Sundown SA-15's, MB Quart DSC 2000.1d, Cranked T-Bars, 285/75/R16 Nitto Terra Grapplers

they pull out, and yes they can tend to break. Usually pulling on the panel will pull them out, or they have a tool that slips under both sides of pin, then you just lift off.

Here it is
http://www.bodyshopzone.com/archives...a_99_jimmy.jpg

__________________
2000 2.5L Ford Banger

What I've Done: Pioneer Head Unit, Nexen 31" Tires, Projector Headlights, Manual To Power Locks, Jet Black Paint Job, American Racing Baja Rims, Billet Grille, Herculiner, Rail Caps, Tinted Windows, Explorer Radio Bezel, Wired Bezel For Projectors, Kicker Sub/ Visonik Amp, Black Carpeting, Kicker 6x9 Speakers, High-Flow Air Intake, New Horn, Black Interior. Center Console, many more still in process.

i fucking hate those pins, ive broken like 5 of them in my truck. best way to take em off, take a fork, and bust off the 2 inner prongs, then slide the fork under the head of the pin and pull it out.

Oh ok Ill try that once I get the extra pins..... Anyone know where to get them?

http://cgi.ebay.com/ebaymotors/FORD-...Q5fAccessories

__________________
CURRENT: 2015 Tacoma DCLB TRD Sport

local autoparts store

__________________
04 Ranger Tremor
Kenwood Excelon x-693
RE Audio SE 12 w/ US Amps Xterminator 1600
10000k HID Headlight Conversion
More to come....

I am changing my headliner and had to remove everyone of them, and did not break any of them. On some of them I can see a stress mark in the center of the button. I will be replaceing them also.

Get behind the button with a needle nose pliers, grab the stem that pushes in .while using a screw driver for leverage. Slowly lever the pins out.

Does anyone know where to get new push pins?