HI!... Well I got my EXPLORER overhead console. It was bought as a kit. It came with the mounting bracket, temp sensor and pigtails for the sensor and the console. Even came with the mounting screws. lol! The only problem it is light blue.

That got fixed quickly. I dismantled the console and put it in my sandblasting cabinet on low PSI. About 40PSI. Worked perfectly. I luv not having to sand. lol! Got it painted tonight as well with the same trim paint I used on my dual "A" pillar gauge pod. Just got to put it back together tomorrow and then install it when I have time. Here's a few pics :









HI!... Here's some updated pics :











HI!... Well I just finished the mechanical aspect of the console install. I'm probably going to wait until the weekend to do the electrical. I think it turned out well. Hopefully tomorrow I'll be able to get my hands on a EXPLORER center console. A guy I know says he has a bunch of them at the junk yard he works at.

Here's a few pics :









HI!... I bought mine off E-BAY. It was like $50.00(U.S). Make sure you get one one without the sun roof button. They sell them on there as kits. Make sure you get the wiring harness pigtail for the console and the temp sensor and it's pigtail. You also want the steel mounting bracket.

Here's a link to the wiring needed to be done :

http://www.cardomain.com/ride/296394/3

http://www.cardomain.com/ride/296394/4

__________________
"2007" RANGER SPORT.
DERALE 16" ELECTRIC FAN, ASP CRANK PULLEY, CUSTOM CAI, 4.10 gears, TP tune. 1/4 = 14.42E.T at 93.18MPH 2.0 60FT. ALL N/A. 13.83E.T at 96.35MPH 1.91 60FT. on 40H.P dry shot.
"1999" F-150 SPORT.
BUILT 5.4, (8.4:1 compression) ALL N/A 354RWH.P/392RWTQ 1.8 60FT. 13.60E.T (on 7 cylinders)
"1983" PRO STREET RANGER.
408 STROKER, (700H.P) ALL N/A tubbed, caged.

JUST SAY NO TO CLUTCH FANS!

mice write up on the color change i was going to install one in my truck but wasn't sure on how to change the color and make it stick..

I want one of these SO bad! I keep looking on ebay, but none of them have the wiring harness pigtail for the console and the temp sensor and it's pigtail or the steel mounting bracket.

http://cgi.ebay.com/ebaymotors/Ford-...Q5fAccessories

http://cgi.ebay.com/ebaymotors/95-01...Q5fAccessories

http://cgi.ebay.com/ebaymotors/95-01...Q5fAccessories

__________________
"2007" RANGER SPORT.
DERALE 16" ELECTRIC FAN, ASP CRANK PULLEY, CUSTOM CAI, 4.10 gears, TP tune. 1/4 = 14.42E.T at 93.18MPH 2.0 60FT. ALL N/A. 13.83E.T at 96.35MPH 1.91 60FT. on 40H.P dry shot.
"1999" F-150 SPORT.
BUILT 5.4, (8.4:1 compression) ALL N/A 354RWH.P/392RWTQ 1.8 60FT. 13.60E.T (on 7 cylinders)
"1983" PRO STREET RANGER.
408 STROKER, (700H.P) ALL N/A tubbed, caged.

JUST SAY NO TO CLUTCH FANS!

Savior! Now I need to just get over my fear of installing it.

HI!... Do you have bucket seats or 60/40 split bench?

__________________
"2007" RANGER SPORT.
DERALE 16" ELECTRIC FAN, ASP CRANK PULLEY, CUSTOM CAI, 4.10 gears, TP tune. 1/4 = 14.42E.T at 93.18MPH 2.0 60FT. ALL N/A. 13.83E.T at 96.35MPH 1.91 60FT. on 40H.P dry shot.
"1999" F-150 SPORT.
BUILT 5.4, (8.4:1 compression) ALL N/A 354RWH.P/392RWTQ 1.8 60FT. 13.60E.T (on 7 cylinders)
"1983" PRO STREET RANGER.
408 STROKER, (700H.P) ALL N/A tubbed, caged.

JUST SAY NO TO CLUTCH FANS!

once you draw on your headliner, its all down hill from there lol. i had the same problem and put off doing mine for a couple months untill i had to balls to do it.

and DAAAAAAAAAAAM those prices are high!

$50 for your OHC? i bought mine for $10 from a junk yard with the bracket, pigtail and alot of wiring and, screws

__________________
Muddin in the ranger, killin ricers in the f350

95 ford ranger 3.0 v6 side step 5 speed 4x4
mods: 6" bds sus lift, 33x12.5r15 bfg km2, expo OHC/expo power seats, full length expo console, 2 1/2" flowmaster super 44 cat back, 4 procomp 5" offroad lights, clear headlights and turn signals, 6k hid kit, 25% tint (fronts)

PNW CREW

HI!... You got lucky..........

__________________
"2007" RANGER SPORT.
DERALE 16" ELECTRIC FAN, ASP CRANK PULLEY, CUSTOM CAI, 4.10 gears, TP tune. 1/4 = 14.42E.T at 93.18MPH 2.0 60FT. ALL N/A. 13.83E.T at 96.35MPH 1.91 60FT. on 40H.P dry shot.
"1999" F-150 SPORT.
BUILT 5.4, (8.4:1 compression) ALL N/A 354RWH.P/392RWTQ 1.8 60FT. 13.60E.T (on 7 cylinders)
"1983" PRO STREET RANGER.
408 STROKER, (700H.P) ALL N/A tubbed, caged.

JUST SAY NO TO CLUTCH FANS!

ya keep looking mine was 10 bucks too

the unit matches quit nicely

I really like the job you did on your OHC
do you think I could install one in my 2009 XLT
I haven't been able to locate one

Yes you can wire colors on your truck may be different

Check ebay for a OHC they usually have a lot of them

also smakes is selling one in the classified section

__________________

that one got sold the other day myke lol

I still have Lazlers in my garage if he wants to sell it.

__________________

lol i dont think he wants to sell it. i shouldve just direct shipped it to canaduh