If the 194 doesn't fit in your HVAC, it'll be a 74. I sell them for $2 a piece if anyone wants, pm me or check out my link in signature.

@RangerDanger. You cannot just buy the bulb for the 4x4 switch/fog switch/light switch. You'll need to take out the current bulb, and mod it to LED(Hard). Or just buy the whole new switch ($30+)

__________________

It's not a 74, it's a 161

__________________

Thanks everyone I ordered all my led lights tonight ill have more then enough to do my dash hvac and more

image-2615893979.jpg

image-1936711360.jpg

Sent from inside a great white with built in wifi

__________________
96 Ford Ranger 2.3 - Loads of mods
03 DSG Mustang GT 5 spd- CAI, Flowmaster cat back, Sequential tail lights, 70mm T.B. 265/305
1992 GMC C1500 4.3 Long Bed 91K

What kind of LEDs do you have for under the seats?

__________________
2004 Ford Ranger Edge 3.0 2WD Manual/31's
Custom Matte Black/Smoked Rear Lights
LED Toolbox\Cooler
http://www.fordrangerforum.com/proje...ld-thread.html

It's a strip I got from Wally World! It's BRIGHT

Sent from inside a great white with built in wifi

__________________
96 Ford Ranger 2.3 - Loads of mods
03 DSG Mustang GT 5 spd- CAI, Flowmaster cat back, Sequential tail lights, 70mm T.B. 265/305
1992 GMC C1500 4.3 Long Bed 91K

Had these done for a while now. But I like them. Just ordered the 194 bulbs from amazon, I believe they were $5 for a 10 pack haha. The hotspots look worse in the picture because I used my phone...

__________________
Red 2001 XLT Stepside, MODS: Thrush glasspack, K&N cold air, throttle body spacer, LED dash conversion, blinker mod, 12" Rockford P3 w/ 500W memphis amp, Kenwood head unit

Bumping back a thread from the dead(Last post: 06-08-2013, 10:39 AM)
I am modding my cluster and have two questions:
1.Before removing the needles everyone talks about calibrating the speedo. I havent read anywhere that talks about any of the other gauges. Am i to assume that i repeat the same process for all the other gauges or am i to assume that i just pop off all the other gauges and place them back at their last position?

2.Regarding colored PNP led mods. What gives off the best color-ie the deepest truest color with no washout? I will be using the 5SMD bulbs.
A.Stripping the overlay and adding white leds with a colored tint on the overlay
B.Stripping the overlay and adding colored leds with a colored tint on the overlay
C.Stripping the overlay and adding colored leds

__________________
'00 Ranger, supercab, flareside, 2wd, 3.0, auto, 3.73 open, Bilstein 4600s, 31x10.5x15 BFGs, 15x8 procomp 152s

"Which PNP bulb is best" is like asking "what is the best way to polish a turd".

SMD boards are the way to go...

__________________
Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend.

[QUOTE=buggman;691752]Now Blue:

Id like to change my dash lights to blue LED bulbs.. Buggman how many LED bulbs did you have to buy and what was the total cost you had in them?? Also what was the size of the bulbs?? I've never took out my dash instrument panel before, so all this is new to me..

__________________
ALL JACKED UP..... 4.0 V6 manual 5 speed, K&N cold air filter system, Helix high tower throttle body spacer, 33/12.50r15 BF Goodwrench A/T, 456 gears, 4" suspension lift, 3" body lift, james duff arms, fox racing shocks, superlift springs, dual exhaust, flowmaster super 10, Pioneer DEH-X9600BHS, Polk Audio MM series speakers and 10" subs, Polk Audio Amps, Rockford fosgate wiring and capacitor, Streetglow lights.. http://www.jamesduff.com/
http://streetglow.com
http://facebook.com/clinton64xl

How To: change your Odometer when doing a gauge swap...95-03 trucks

__________________
1998 Ranger XLT Super Cab 4.0 ohv v6 - 5r55E automatic Trans - 8.8 with 3.55gears - Toreador Red Clear Coat Metallic -Explorer Sport Trac White Faced Gage Cluster -2006 Mirror Swap-16" Mustang wheels with 215-65-16" Falken Tires

I wasnt asking which pnp bulb was the best. I was asking which method of a overlay/led color was the best to achieve a good color. I already decided to use 5 smd pnp bulbs because with my research it has the best light distribution. Ive also ordered bulbs in white and colored so i no longer need a definite answer as i can try every method on my own now.

__________________
'00 Ranger, supercab, flareside, 2wd, 3.0, auto, 3.73 open, Bilstein 4600s, 31x10.5x15 BFGs, 15x8 procomp 152s

Here is the best distribution:




pick any color you like

2006 Mazda B4000 LED Cluster, HVAC & Dash Retrofit

__________________
Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend.

That's amazing

__________________
1997 B2300 reg cab 2.3 Lima, 15x8.5 Mickey Thompson classic 2, 31x10.50 cooper discover at3, 7.5 open 4.10 rear, dynomax super turbo catback, alpine iva-w200 w/ nav, kicker 6x8s, alpine type R 8, alpine 250W mono amp, power bass 400.4, tool box & camper shell, compustar alarm/remote start.
1956 Ford F100 rust bucket with big plans!

Heres how my little project is coming along. This is with incandescent backlights. Im still waiting to see what a difference the colored and white smd leds are going to make. The cluster build is in my build thread Wettos 00 ranger build

__________________
'00 Ranger, supercab, flareside, 2wd, 3.0, auto, 3.73 open, Bilstein 4600s, 31x10.5x15 BFGs, 15x8 procomp 152s