So as many of you know i have black racing seats in my ranger and i like them alot!...However.. There is a lip on each side that makes getting in and out...not difficult but not easy.. I was wondering if i could razor blade the fabric, take out the cushioning in that part and cut down the metal frame there? Pics attached
It's only a problem on the door side obviously

__________________
2002 Wedgwood Blue 4x4 |CAI, Dual Gibson Exhaust, Re-tuned | Exterior/Interior LED
Painted Interior | Painted exterior trim and black chrome
Black Leather Racing Seats | Black Carpet
Dual Headunit | Pioneer Speakers 180 W ea.
ATX 16x8 wheels on 30" BFG | 5% rear tint 20% front | Headlight Mod | 8K HIDS

you can do that, but it will not look right. also, the foam is already broken down/worn out in that area, hence the cover not holding it's shape. if you cut the cover open, then you'll have to get it resewn. it would be better to take the seat out, take it apart and remove the cover before doing any mods to it.

__________________
Krylon Fusion is for Amateurs.

hmm okay thanks

__________________
2002 Wedgwood Blue 4x4 |CAI, Dual Gibson Exhaust, Re-tuned | Exterior/Interior LED
Painted Interior | Painted exterior trim and black chrome
Black Leather Racing Seats | Black Carpet
Dual Headunit | Pioneer Speakers 180 W ea.
ATX 16x8 wheels on 30" BFG | 5% rear tint 20% front | Headlight Mod | 8K HIDS

You'll have to just "JUMP IN" higher to clear the seat hump

__________________
1999 Ford Ranger XL
Vulcan V6, K&N 33-2106 Filter, 3:73 Gears,
FRONT 3'' Susp Lift/REAR 3'' susp.+ 3" blocks,06 Mirrors
31"/10.5"-15" BFG on AR-172 Polished Rims,Smitybilt Console
95 Mustang Saleen Seats,Alternating Blinker MOD
Pioneer CD/iPod/GPS,6.5 Polk Audio/6.5 Sub-Woofers,
Stainless Bed Extender,Throttle and Dome Light MOD,
12" Tool Box,Billet Grille,NightShade Tint,Projector Headlamps
6000K H.I.D. so i can see at night! LOL

JESUS is LORD!