Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 05-12-2011, 07:04 PM
YoursTruly YoursTruly is offline
Ford Ranger Owner
 
Join Date: Jul 2010
Posts: 53
Default 91' super cab, buckets to bench questions

hey guys, so I'm buying a 91' Ranger 4x4 4.0L supercab with a manual transmision, and It has the buckets and console. I'm looking to put a 60/40 bench in their place. So my questions are: Were there 60/40's made for the gen II? And will gen III and gen IV models fit? (pardon my extreme ignorance, I'm completely new to rangers, and haven't seen size charts or comparisons.)

Any help or advice on this would be great!
Reply With Quote
  #2  
Old 05-13-2011, 03:31 AM
drppdyllwrngr drppdyllwrngr is offline
Ford Ranger Driver
 
Join Date: Feb 2010
Posts: 3,122
Default Re: 91' super cab, buckets to bench questions

up through 97 should pretty much be a direct bolt in. 98+ may work, but will require more fab work. you can get reg cab or ext cab from 97 and older, but you will have to swap your tracks over. real simple, just a few bolts. 98+ you will need to figure out how to remount your seat belt.
__________________
Krylon Fusion is for Amateurs.
Reply With Quote
  #3  
Old 05-13-2011, 03:25 PM
YoursTruly YoursTruly is offline
Ford Ranger Owner
 
Join Date: Jul 2010
Posts: 53
Default Re: 91' super cab, buckets to bench questions

Awesome! Thanks a lot. So, are the slides / mounts different for the 60/40 from the bucket's?
Reply With Quote
  #4  
Old 05-13-2011, 05:43 PM
drppdyllwrngr drppdyllwrngr is offline
Ford Ranger Driver
 
Join Date: Feb 2010
Posts: 3,122
Default Re: 91' super cab, buckets to bench questions

not different for buckets vs 60/40, but different from reg cab to ext cab. so make sure you get sliders from the same type cab you have!
__________________
Krylon Fusion is for Amateurs.
Reply With Quote
  #5  
Old 05-13-2011, 06:23 PM
YoursTruly YoursTruly is offline
Ford Ranger Owner
 
Join Date: Jul 2010
Posts: 53
Default Re: 91' super cab, buckets to bench questions

awesome! Thanks a lot for the advice! Junk yard hunting shall commence soon!
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Want to Buy: Steps for 96 Super Cab (KY) buggman Exterior Parts 3 02-26-2011 07:29 PM
Seats in a 97 Super Cab 97RangerRick Interior Tech 7 01-02-2011 01:49 PM
Sub layout in an XLT Super cab???? chyzdad Audio / Video 1 09-11-2010 01:55 PM
Want to Buy: Bench seat for '94 reg. cab Richr_Lemont Interior Parts 0 03-14-2010 03:22 PM
60/40 bench to buckets idea greyghost Interior Tech 5 10-17-2009 08:31 AM