Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 04-05-2011, 09:20 PM
pooleo pooleo is offline
Ban Survivor. (x2)
 
Join Date: Jun 2010
Posts: 6,764
Default Installed EATC, OHC and Mustang today

Just finished up the install of the EATC. Also put in my OHC and dome light.

Still need to wire up temp sensor for OHC. And now I need a blue faced radio! the green just dont jive with the blue on the OHC and EATC!!!





----------

And a REALLY big thanks to Rwenzing (spelling) article on car domain. Could not have done it without the walk thru. Thanks
__________________
1999 | Ext. Cab | 4.0 | 4x4 | 4.10's
Quote:
A Gladiator does not fear death. He embraces it. Caresses it. Fucks it. Each time he enters the arena, he slips his c0ck in the mouth of the beast, and prays to thrust home before the jaws snap shut. - Oenomaus
Ball Joints/Upper A-Arms How To
Replace Door pin/bushing
Repair broken dome light tabs
VIDEO OHC Install
Reply With Quote
  #2  
Old 04-05-2011, 09:22 PM
DiabloBlanco DiabloBlanco is offline
Get Lifted.
 
Join Date: Nov 2010
Posts: 6,402
Default Re: Installed EATC, OHC and Mustang today

Holy cow looks good!
__________________
YZ the way to be!
The Brotherhood!

Mods to come: Camburg entry 6.0 system. FiberwerkX Fenders and bedsides. Tube bumper.
R.I.P. Jeff Ashton. 1992-2011
Reply With Quote
  #3  
Old 04-05-2011, 11:03 PM
S13minus1 S13minus1 is offline
Sideways? Sideways.
 
Join Date: Jun 2010
Posts: 1,592
Send a message via AIM to S13minus1
Default Re: Installed EATC, OHC and Mustang today

DARN YOU!
i want to go eatc. but i dont have the dash space for it :'(
__________________
-Alex
'10 Ranger XL 2.3L Manual
Mods: Stereo, Tint, Weatherguard rain shields, Intake silencer removal, LED brake, turn signal, reverse, license plate, and dome lights, DDM HID's (currently removed), lowered, 17" wheels with spacers, Explorer autodim mirror with Autolamps, Magnaflow exhaust, Buggman LED 3rd Brake Light...
Quote:
Originally Posted by ColinS View Post
awe come on alex be a man!
Reply With Quote
  #4  
Old 04-05-2011, 11:12 PM
btm757 btm757 is offline
In Memory of Jason Finn
 
Join Date: Jul 2010
Posts: 748
Default Re: Installed EATC, OHC and Mustang today

I want eatc so bad but dont have the patience to install everything
__________________
This is Ford Country and On a quiet Night you can Hear a Chevy Rust.
2004 XLT SUPER CAB STEPSIDE 4.0l 4x4 3"BL W/ 33/12.5 KM2s on Black Procomps and I Haz ______/--------- <Cutoff FTW
Facebook
Reply With Quote
  #5  
Old 04-06-2011, 12:13 AM
richarddhoward richarddhoward is offline
Road Trippin' King!
 
Join Date: Nov 2009
Posts: 5,010
Send a message via MSN to richarddhoward
Default Re: Installed EATC, OHC and Mustang today

I just want to know how hard the install was? It looks good man!
__________________
97 Ranger - 4.0 V6 auto, 4wd, 31x10.5x15s Wild Country XTX Sport All Terrains, Warn locking hubs, Pioneer deck with iPod attachment, Snugtop Topper, K&N filter, scan gauge II, Hella 500 Lights, More parts coming, waiting for the paycheck to get bigger!

Truck built in loving memory of Norm Howard
Outcast Racing
PNW Crew!!!
Afterhours Clan!!
Quote:
Originally Posted by aaron_ariens View Post
I think Henry just shit himself
Quote:
Originally Posted by Radness View Post
Its kind of like that carnival game "Whack A Mole" but with guns! Haha
Reply With Quote
  #6  
Old 04-06-2011, 01:26 AM
DeepSouthRanger DeepSouthRanger is offline
Don't Stop Modding!!
 
Join Date: May 2009
Posts: 545
Default

Can you do the EATC without having factory radio?? Looks great!!
__________________
So Many Mods,So little Time!!

Preformance:
SCT Livewire w/ Rogue tunes,Rogue Larger MAF Housing w/ card type sensor,MAC cold air intake,40 series FLOWMASTER exhaust w/ duals,Set of 1.7 Roller rockers,full set of under drive pulley's(Blue),Screamin demon coil,8mm heat braided wires(Blue),double patium plus,Gator back belt,200 amp(power coated blue) Alt.,Taurus fan
Reply With Quote
  #7  
Old 04-06-2011, 02:02 AM
doyouquaxu doyouquaxu is offline
Almost ******
 
Join Date: Mar 2011
Posts: 7,480
Default Re: Installed EATC, OHC and Mustang today

Quote:
Originally Posted by DeepSouthRanger View Post
Can you do the EATC without having factory radio?? Looks great!!
i don't think your climate control system is affected by the radio. i'm no expert though, so i could be wrong.

looks good though! i am gonna tackle the eatc soon.
__________________
Why does everyone think prerunners just jump stuff?


Please click HERE to watch this video!
Reply With Quote
  #8  
Old 04-06-2011, 03:11 AM
DeepSouthRanger DeepSouthRanger is offline
Don't Stop Modding!!
 
Join Date: May 2009
Posts: 545
Default

Hope so but the only ones I've ever seen they've had factory radio..
__________________
So Many Mods,So little Time!!

Preformance:
SCT Livewire w/ Rogue tunes,Rogue Larger MAF Housing w/ card type sensor,MAC cold air intake,40 series FLOWMASTER exhaust w/ duals,Set of 1.7 Roller rockers,full set of under drive pulley's(Blue),Screamin demon coil,8mm heat braided wires(Blue),double patium plus,Gator back belt,200 amp(power coated blue) Alt.,Taurus fan
Reply With Quote
  #9  
Old 04-06-2011, 05:25 AM
pooleo pooleo is offline
Ban Survivor. (x2)
 
Join Date: Jun 2010
Posts: 6,764
Default Re: Installed EATC, OHC and Mustang today

Quote:
Originally Posted by richarddhoward View Post
I just want to know how hard the install was? It looks good man!
It was fairly easy actually. Hardest part was that the original blend door actutator pin broke off in the blend door when I removed it So I had to cut the bottom of the heat box there out, remove the blend door and remove the "D" piece. I did not hook up all the sensors either. I really dont care to have it "automatic". As long as I can control it manually I'm happy. The actutator removal was tough also, I was able to get about 7 turns on the back bolt, then just poped it out with a BFS. This breaks the rear mount but from what I understand, no one puts that bolt back in anyhow.

----------

Quote:
Originally Posted by DeepSouthRanger View Post
Can you do the EATC without having factory radio?? Looks great!!

Yeah, you dont have to have factory radio. You just have to tap into (2) wires in the radio harness. But wont affect anything if you have aftermarket
__________________
1999 | Ext. Cab | 4.0 | 4x4 | 4.10's
Quote:
A Gladiator does not fear death. He embraces it. Caresses it. Fucks it. Each time he enters the arena, he slips his c0ck in the mouth of the beast, and prays to thrust home before the jaws snap shut. - Oenomaus
Ball Joints/Upper A-Arms How To
Replace Door pin/bushing
Repair broken dome light tabs
VIDEO OHC Install
Reply With Quote
  #10  
Old 04-06-2011, 09:57 AM
richarddhoward richarddhoward is offline
Road Trippin' King!
 
Join Date: Nov 2009
Posts: 5,010
Send a message via MSN to richarddhoward
Default Re: Installed EATC, OHC and Mustang today

Quote:
Originally Posted by pooleo View Post
It was fairly easy actually. Hardest part was that the original blend door actutator pin broke off in the blend door when I removed it So I had to cut the bottom of the heat box there out, remove the blend door and remove the "D" piece. I did not hook up all the sensors either. I really dont care to have it "automatic". As long as I can control it manually I'm happy. The actutator removal was tough also, I was able to get about 7 turns on the back bolt, then just poped it out with a BFS. This breaks the rear mount but from what I understand, no one puts that bolt back in anyhow.

----------




Yeah, you dont have to have factory radio. You just have to tap into (2) wires in the radio harness. But wont affect anything if you have aftermarket
I may have to do this...
__________________
97 Ranger - 4.0 V6 auto, 4wd, 31x10.5x15s Wild Country XTX Sport All Terrains, Warn locking hubs, Pioneer deck with iPod attachment, Snugtop Topper, K&N filter, scan gauge II, Hella 500 Lights, More parts coming, waiting for the paycheck to get bigger!

Truck built in loving memory of Norm Howard
Outcast Racing
PNW Crew!!!
Afterhours Clan!!
Quote:
Originally Posted by aaron_ariens View Post
I think Henry just shit himself
Quote:
Originally Posted by Radness View Post
Its kind of like that carnival game "Whack A Mole" but with guns! Haha
Reply With Quote
  #11  
Old 04-06-2011, 12:04 PM
DeepSouthRanger DeepSouthRanger is offline
Don't Stop Modding!!
 
Join Date: May 2009
Posts: 545
Default Re: Installed EATC, OHC and Mustang today

Quote:
Originally Posted by pooleo View Post
Yeah, you dont have to have factory radio. You just have to tap into (2) wires in the radio harness. But wont affect anything if you have aftermarket
Where did you find a blue one?? Or did you convert it? Do you have to have any other parts besides the HVAC?
__________________
So Many Mods,So little Time!!

Preformance:
SCT Livewire w/ Rogue tunes,Rogue Larger MAF Housing w/ card type sensor,MAC cold air intake,40 series FLOWMASTER exhaust w/ duals,Set of 1.7 Roller rockers,full set of under drive pulley's(Blue),Screamin demon coil,8mm heat braided wires(Blue),double patium plus,Gator back belt,200 amp(power coated blue) Alt.,Taurus fan
Reply With Quote
  #12  
Old 04-06-2011, 01:16 PM
pooleo pooleo is offline
Ban Survivor. (x2)
 
Join Date: Jun 2010
Posts: 6,764
Default Re: Installed EATC, OHC and Mustang today

Quote:
Originally Posted by DeepSouthRanger View Post
Where did you find a blue one?? Or did you convert it? Do you have to have any other parts besides the HVAC?
blue comes from 95-97 exploder. Dont have anything else at the moment. Do you need anything inparticular?
__________________
1999 | Ext. Cab | 4.0 | 4x4 | 4.10's
Quote:
A Gladiator does not fear death. He embraces it. Caresses it. Fucks it. Each time he enters the arena, he slips his c0ck in the mouth of the beast, and prays to thrust home before the jaws snap shut. - Oenomaus
Ball Joints/Upper A-Arms How To
Replace Door pin/bushing
Repair broken dome light tabs
VIDEO OHC Install
Reply With Quote
  #13  
Old 04-06-2011, 03:36 PM
richarddhoward richarddhoward is offline
Road Trippin' King!
 
Join Date: Nov 2009
Posts: 5,010
Send a message via MSN to richarddhoward
Default Re: Installed EATC, OHC and Mustang today

Quote:
Originally Posted by pooleo View Post
blue comes from 95-97 exploder. Dont have anything else at the moment. Do you need anything inparticular?
Is there years that have the green interface?
__________________
97 Ranger - 4.0 V6 auto, 4wd, 31x10.5x15s Wild Country XTX Sport All Terrains, Warn locking hubs, Pioneer deck with iPod attachment, Snugtop Topper, K&N filter, scan gauge II, Hella 500 Lights, More parts coming, waiting for the paycheck to get bigger!

Truck built in loving memory of Norm Howard
Outcast Racing
PNW Crew!!!
Afterhours Clan!!
Quote:
Originally Posted by aaron_ariens View Post
I think Henry just shit himself
Quote:
Originally Posted by Radness View Post
Its kind of like that carnival game "Whack A Mole" but with guns! Haha
Reply With Quote
  #14  
Old 04-06-2011, 03:39 PM
doyouquaxu doyouquaxu is offline
Almost ******
 
Join Date: Mar 2011
Posts: 7,480
Default Re: Installed EATC, OHC and Mustang today

yeah, there are years that have green, or blue. one thread i just read had the link to the cardomain site that the OP used as instructions, and it gave all that info.
__________________
Why does everyone think prerunners just jump stuff?


Please click HERE to watch this video!
Reply With Quote
  #15  
Old 04-06-2011, 03:45 PM
richarddhoward richarddhoward is offline
Road Trippin' King!
 
Join Date: Nov 2009
Posts: 5,010
Send a message via MSN to richarddhoward
Default Re: Installed EATC, OHC and Mustang today

Quote:
Originally Posted by doyouquaxu View Post
yeah, there are years that have green, or blue. one thread i just read had the link to the cardomain site that the OP used as instructions, and it gave all that info.
Yeah, I'm in that thread too. I kind of want to tackle this now...
__________________
97 Ranger - 4.0 V6 auto, 4wd, 31x10.5x15s Wild Country XTX Sport All Terrains, Warn locking hubs, Pioneer deck with iPod attachment, Snugtop Topper, K&N filter, scan gauge II, Hella 500 Lights, More parts coming, waiting for the paycheck to get bigger!

Truck built in loving memory of Norm Howard
Outcast Racing
PNW Crew!!!
Afterhours Clan!!
Quote:
Originally Posted by aaron_ariens View Post
I think Henry just shit himself
Quote:
Originally Posted by Radness View Post
Its kind of like that carnival game "Whack A Mole" but with guns! Haha
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Installed New OHC Today hdmc Interior Tech 12 12-05-2011 08:24 PM
Installed my first mod: OHC ropenrein Interior Tech 25 11-05-2010 10:49 AM
Installed my ohc! wyman00 Vehicle Snapshots 19 08-15-2010 10:27 AM
installed the ohc today whiteranger03 Vehicle Snapshots 10 06-11-2010 08:00 PM
OHC Installed Pbav8tor Interior Tech 13 02-21-2010 11:28 PM