how should i go about mounting my cb to the top of the headboard between the visors?

any ideas or people who have done this?

thanks

Attached Images

cb.jpg (68.1 KB, 23 views)

__________________
'02 edge 4wd
- Fog Light Mod

PNW Crew
My style is so fresh, Febreze just called me to do a commercial...DAMN!

A Lion wouldnt cheat...but a Tiger Wood!!!

I think most use the mounting bracket by screwing it into the roof.
there is enough gap so you wont puncture the very top.

__________________

do i pull the headboard back or do i just screw in, or do i risk screwing and cutting wires etc. if i use tiny screws etc i dont think i would screw through the roof?

__________________
'02 edge 4wd
- Fog Light Mod

PNW Crew
My style is so fresh, Febreze just called me to do a commercial...DAMN!

A Lion wouldnt cheat...but a Tiger Wood!!!

I wish I could do that to mine.

__________________
2005 ford ranger edge 5 speed, 4x4, v6 4.0, 4inch superlift, 33 10.50 km2.

1984 ford ranger 4x4, 4 inch body lift.

PNW Crew

Excuse me for saying so, but based on the questions you're asking, I don't think you should be attempting this installation at the current time.

__________________
2001 Ranger XLT 4.0L SOHC
Silver Frost w/ Dark Graphite interior


Modifications
Summit 3" Body Lift
31x10.50 A/T tires
Explorer overhead console
Explorer auto-dim mirror
Explorer auto-headlights
Aux1 & Aux2 inputs on factory AM/FM/CD/Cassette
Door-dinger silencer button
Seamless retractable roof and passenger-side ejection seat with steering wheel mounted controls and safety interlock

why do you say that??

__________________
2007 F150 FX4
5.4 trition
train horns
fabtech bumper with 3 kc

1995 ext. cab ranger
4x4 automatic
4in pipe bumber in rear
cop push bumper on the front
roll bars
30x9.50r15 wild country a/ts

...because I read the questions he was asking, and the statements he was making, and it sounds like he's not quite ready to be removing the headliner, building a backing bracket to mount the CB that will fit under the headliner, mounting it, cutting the headliner appropriately, etc.

it sounds more like he's going to use "tiny screws" and try to hang the CB bracket directly from the headliner. ...or, slightly longer "tiny screws" and end up piercing the skin of the roof on his truck.

In short, I don't think he's as ready to do this level of modification as he thinks he might be.

__________________
2001 Ranger XLT 4.0L SOHC
Silver Frost w/ Dark Graphite interior


Modifications
Summit 3" Body Lift
31x10.50 A/T tires
Explorer overhead console
Explorer auto-dim mirror
Explorer auto-headlights
Aux1 & Aux2 inputs on factory AM/FM/CD/Cassette
Door-dinger silencer button
Seamless retractable roof and passenger-side ejection seat with steering wheel mounted controls and safety interlock