Simple enough? No, i can't find anywhere OEM door locks from Ford and I want to install them on my truck that came with manual locks and windows, can anyone show me how to? or is it not worth it?

__________________
2002 Ford Ranger XL 3.0 L V6 4x2 reg. cab 5 speed Auto

It would be worth it. PM member Mfernandez, He is in Uruguay and is in the process of putting power in the doors

Moved to interior tech. How To submissions is for actual articles showing how to do something.

you said to PM Mfernandez, however, I can't find his profile, do u have a link?

----------


and how do i do that?

__________________
2002 Ford Ranger XL 3.0 L V6 4x2 reg. cab 5 speed Auto

Click here ===> http://www.fordrangerforum.com/members/mfernandes.html

thank you clinton

__________________
2002 Ford Ranger XL 3.0 L V6 4x2 reg. cab 5 speed Auto

so buy aftermarket.

I put in after market power door locks using this kit , they work great . I didnt get the remote . I also can control the locks from the inside of the truck using switches
http://files.thehoffmangroup.com/ins...A2000_4000.pdf

__________________
1996 Mazda B3000- Mustang GT Recaro seats , Explorer center console and upper console ,tinted windows ,1999 XLT front clip and step side box , side exit exhaust , custom stereo install .

thanks mazda man, did you buy this straight from the company? or from ebay kinda website? trying to find something cheaper here.

__________________
2002 Ford Ranger XL 3.0 L V6 4x2 reg. cab 5 speed Auto

When doing it take pictures and then post them in the how to section describing how to do this in detail.

here I am pal! Im sorry for the delay, never saw your visitors message!

Dont go for aftermarket junk, a clean oem installation is possible. offcourse, its more expensive and will require a more difficult install process, but the results will be much, much betetr!

As clinton sayed, I wont be doing this for a couple of months, meanwhile, Im getting all the parts Ill need;

- both doors wire harness (got them)
- both windows motors with regulators (pending)
- both handles with switches (already got them thanks to clinton)
- relay, fuses, cables (pending)

Its possible to intall the original components, dont go for aftermarket!!!
OEM are always better!

Ill make a nice write up when Ive done this, but as I live in the wrong emisphere, I have to wait at least 3 or 4 months to do this

__________________
Paysandú, Uruguay
1996 Reg. Cab Ford Ranger - V-6 3.0L - 5 speed manual trans.

DONE: original rims; Motorcraft spark plugs; Motorcraft s.p. wires; new ignition drum and key; chromed bed hooks
PENDING: power windows, locks and mirrors; tinted windows; new bed stripes; OEM A/C

BTW you guys may not know this but to add the power lock actuators to your door latches you have to swap out the "door ajar" switches. When you try to install the actuators on latches that came non powered the electrical connector is in the way. The other switches go in at a different angle allowing the actuator to fit.

__________________
Quality Engineer (Electronics) for Kia Motors
University of Tennessee Electrical Engineering Graduate
2000 XLT 2.5L A/T
Mods:
Explorer OHC
Explorer Autodim Mirrors w/ Autolamps
Explorer Sport White Face Gauges