Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 02-19-2011, 01:29 PM
02'4.04x4 02'4.04x4 is offline
Ford Ranger Driver
Join Date: Aug 2009
Posts: 634
Default Where's STL? What multi-switch is compatible?

Hey Guys and Gal.

Run into a bit of an issue. I bought a later model Multi-Switch as my 02' bends downward and hits my knee make the left turn signal impossible. I'm 6'2". Anywho the newer style one 04' that bends upward has all different connectors, The better kind with a single thumb catch vs the double pry nonsense ones on my 02'. Can anyone tell me what year they have successfully retrofitted? Below is a pic of the connector side of the two MS's MTIA!
Current Mods
White gauges and Temp Cntrl, OHCw/Buggman LED mod,
Bosch +4, Accel Coil Pack, MSD6AL, Walbro, HiFlo Fuel filter,
Custom Ram Air, K&N, Ported / Matched intake, JBA 9mm wires,
Tweeked FPR, EBC 6k's, DynoMax-S CatBack, Jet-Chip, Reflex shocks,
New Anvil Mounts, Timbren's, Optima Yellow, DB 220A Alt. w/4g. jumper,
Western snow plow, More2Come

Last edited by 02'4.04x4; 02-19-2011 at 01:35 PM.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Steering Wheel Cover Removal For Multi-switch Replacement Maninblack Interior Tech 3 04-28-2012 06:11 AM
Multi function switch DieselBrad Electrical Tech 7 08-25-2010 03:23 PM
Making my own PCB Multi-LED corners. Jp7 Exterior Tech 11 08-02-2010 02:34 PM
compatible parts davidjsouth Exterior Tech 1 05-10-2010 11:41 AM
Compatible gauge clusters Daedalus Interior Tech 6 03-22-2010 10:58 PM