If you get non powered seats they will swap over to the single cab seat tracks.

__________________

My Build Thread!!!

Will they work in my super cab?

__________________
'02 XL SC, 2WD, 3.0 auto, tinted, mustang dome light, throttle cable, air box and blinker mods, clear corners, '06 tails, painted grill insert and bumpers, Mountaineer bucket seats and shorty console, XLT door panels, 06+ emblems.
Woodbridge, VA

what?


not with your ranger tracks. you will need a set of 93-7 ext cab or 95-03 explorer tracks. you can get the power ones and make them power mustang seats in your ext cab with a little work.

__________________
Krylon Fusion is for Amateurs.

A little confused, it says what seats will fit into Rangers but not any years.

I have a 99 ext cab 2 door with a 60/40.
I want to do a 40/40 2 bucket seats.

What are my obvious options for a quick bolt in??
I eventually want to do the full explorer center console mod.

__________________
1999 Ranger 3.0FFV-ExtCab-4x4-My 99 Build
1998 Ranger 3.0-ExtCab-4x4-PROJECT TRUCK-My 98 Build

explorer seats are bolt in for 98+ ext cab trucks. with that said, mustang, b2, etc will bolt up to the explorer tracks. so if you wanted mustang seats, you would bolt them to explorer tracks, then bolt them in 98+ ext cabs. 93-7 ext cab ranger tracks are the same as explorer tracks.

98+ reg cab is different. there aren't any true bolt in seats, other than 98+ reg cab rangers. but you can use 93-7 reg cab tracks, slightly modded, and bolt in explorer, mustang, b2, etc.

with any 98+ ranger, you will have to mount your seat belt to the side of your seat. most of the seats on the list have holes on the inside edge that would allow for it.

__________________
Krylon Fusion is for Amateurs.

What year mustang seats should I look for? I'm Assuming all years work.

__________________
2001 Ford Ranger V6 3.0L 2wd XL Oxford White

My Truck

fox-03(4?)

__________________
Krylon Fusion is for Amateurs.

Okay thanks.

__________________
2001 Ford Ranger V6 3.0L 2wd XL Oxford White

My Truck

I got a nice set of Mountaineer seats and have installed the passenger so far. My seats ('02 XL super cab) have a plug that the new ones don't, so the air bag light stays on. It is a 2 prong plug - can I just fool the system and create a loop?

__________________
'02 XL SC, 2WD, 3.0 auto, tinted, mustang dome light, throttle cable, air box and blinker mods, clear corners, '06 tails, painted grill insert and bumpers, Mountaineer bucket seats and shorty console, XLT door panels, 06+ emblems.
Woodbridge, VA

swap your seat belts to the new seats. no more problem.

__________________
Krylon Fusion is for Amateurs.

Shows 82-88 Thunderchicken seats fit... how about 89-97? Got a very sexy unmolested set at my local pnp up for grabs. And imho my 95 I had was the most comfortable seats Ive sat on.

__________________
1995 Ford Ranger XLT- Project #27

so is this a no on an 01 explorer sport set of leather seats fitting in my 00? i can change out the tracks no problem...

__________________

if you have an ext cab, they will bolt in. if you have a reg cab, you can get a set of 93-7 reg cab ranger tracks, bolt them to the explorer seats ( so don't get power seats ) then mod the ranger tracks slightly to get them into your 00.

__________________
Krylon Fusion is for Amateurs.

thanks a ton

__________________

Can i do a straight switch of fx4 center console and seats?

__________________
:01 4x4 4door v6 4.0 stepside.
3in body lift.. leveling keys. 285/75/16
airbox mod. throttle cable mod. painted bezel/vents.satin front grille.smoked recon cab lights.hella500s.cherybomb glasspack.
BURNIN GASS AND HAULIN ASS