hey guys, I'm confused as to the first chart. is the year listed the year of the ranger I have, or is that the year of the seat doner vehicle? i have a 2010 Ranger ext cab 4x4 sport. is there any seats (leather, power, heat)

__________________
2010 4x4 sport, 4.0L V6, manual, custom front bumper, door puddle LEDs, more to come...

I would be real happy with more leg room in a standard cab, ask before but no one had any ideas about that.

__________________
94 Ranger 2wd 302/c4,overhead console, 15" mountaineer rims, 33/12.50/15, 96 - 7.5 3.73, 3" bodylift, 5.5 procomp lift on the front and 3" blocks on the back, 8.8 4.10 LS still on garage floor

I have a standard cab, 99' sport.

Will 2000 or 93 bucket seats from an explore fit without modification

Ok I've seen it asked before but to get the answer for my specific truck mod here goes again. I have a 99 x cab 2wd. What tracks do I need to swap seats and what seats work best with those tracks. Thanks for your patience with this guys. I'm looking for the most plush and comfortable seats I can get my hands on

you don't need to swap the tracks if your extended cab so you can get explorer seats

__________________
Black 2008 ranger sport 4.0 SOHC SAS'd and converted to 4x4 riding on a Dana 50 up front and a sterling 10.50 in the rear regeared with 5.13's, mickey thompson classic 3's rapped in 37x12.50 maxxis creepy crawlers

Same year or can I use newer year seats?

you can use any where from 96-2001 explorer seats, I recommend the leather limited seats or the Eddie bower leather seats there the most "comfy". And if you want to go above and beyond you can get a pair of seats(in my case limited leather seats) and have new foam and reupholstered in new leather (in my case black) and they will look factory as well as being very comfy.

image-1076980306.jpg

__________________
Black 2008 ranger sport 4.0 SOHC SAS'd and converted to 4x4 riding on a Dana 50 up front and a sterling 10.50 in the rear regeared with 5.13's, mickey thompson classic 3's rapped in 37x12.50 maxxis creepy crawlers

Wow those are sweet! So 96-01 explorer will just bolt right in?

Yup

__________________
95 Ranger XLT 4x2 2.3 I4 5 speed 206,000 *dead*
96 Ranger XLT 4x4 4.0 V6 5 speed 173,000 *alive*
D35 front, 8.8 rear, 3.73 gears, limited slip rear diff

yep only thing you have todo is drill out the two front holes on each seat just a tad, and run a power and ground to each seat.

__________________
Black 2008 ranger sport 4.0 SOHC SAS'd and converted to 4x4 riding on a Dana 50 up front and a sterling 10.50 in the rear regeared with 5.13's, mickey thompson classic 3's rapped in 37x12.50 maxxis creepy crawlers

Has anyone tried fitting newer explorer seats into either a 93-97 or a 98+? There is an 08 explorer at my local yard with beautiful seats that I would love to get if I could put then in either of my trucks.

__________________
2008 FX4 4.0, Automatic, 4.10 8.8 L/S, cheap fiberglass shell
Torsion crank\shackle lift
285/75 16 duratracs on factory rims (yes, they rub)
Sony\JL Audio sound and connectivity
Sold: 1993 Ford Ranger 3.0, 2wd, automatic
Sold: 1998 Ford Ranger 2.5, 2wd, standard

Always wondered the same thing.

__________________

-Link-

From what ive read ranger tracks won bolt in and seats are wider as well.

__________________
2001 Ford Ranger Edge, 4.0L V6, 4x4, automatic, Extended cab, 165,000 miles, 8.8 rear axle, Auburn L/S, 4.10 gears, body lift, 32x11.5r15 falken wild peak A/T, head light mod, black honeycomb grille. 06+ corners, fx4 seats, led back up light

MODS TO COME: pillar gauges, recover seats, stereo and that it for now ................

Thanks, I think you're right. So I found another set I like, but don't know the year. Can anyone tell me about what year this expo sport is?

Attached Images

2014-04-12_11-29-01_724.jpg (100.2 KB, 52 views)

__________________
2008 FX4 4.0, Automatic, 4.10 8.8 L/S, cheap fiberglass shell
Torsion crank\shackle lift
285/75 16 duratracs on factory rims (yes, they rub)
Sony\JL Audio sound and connectivity
Sold: 1993 Ford Ranger 3.0, 2wd, automatic
Sold: 1998 Ford Ranger 2.5, 2wd, standard

This is a pretty awesome thread. I might go crawl around some junked explorers to see what's available to me now.

Anyone try to go the other way, though? Taking out 60/40 or buckets and putting in a standard old bench seat?

----------

Check the 10th digit of the VIN.