height shouldn't be an issue. you will not be able to use the power tracks. they won't bolt up to a reg cab. you can drill new holes through the floor. or get a set of 93-7 reg cab ranger tracks and bolt them to the explorer seats. they will pretty much drop in then.

__________________
Krylon Fusion is for Amateurs.

What is the specific reason I won't be able to use the power tracks? Because holes don't line up? or is there another glaring issue I'm missing? I'm totally okay with the fabrication and wiring aspect of this swap to make it work perfectly.

__________________
02' Mazda B2300 Harvest Gold 2WD Base, Expo Power Leather Seat Swap,18% Front Window tint

bolt holes don't line up. there are two different length tracks used in the rangers. a short one in the ext cabs and a longer one in reg cabs (iirc. it's either that way or visa versa. either way, they won't swap). the explorer seats use the same tracks length as the ext cab ranger. the front two should line up with the reg cab, but the rear two will not. it may cause the seat to lean forward, i'm not sure. would love to see some pics if you decide to use them.

__________________
Krylon Fusion is for Amateurs.

I'll be sure to take pics, I think I should be able to make them work...I haven't got the other seats out yet to take a look at the floor and see what I'm dealing with so I don't know for sure yet, but I'm confident! Aha.

__________________
02' Mazda B2300 Harvest Gold 2WD Base, Expo Power Leather Seat Swap,18% Front Window tint

So my question is can I just swap the base of a seat to make it a bucket seat as I rather not cut the middle of my 60/40 and I have the air bag seats so I was kind of hopping the base was the same for most year.

__________________
2010 Ranger 4x4 Sport, FX4 stick shifter, 31" Duratrac
Drive it like you stole it, fix it like you own it!

yes you can. but it has to be 04+ to work. cutting it will be a lot easier and cheaper!

__________________
Krylon Fusion is for Amateurs.

Dodge dakota bench seats fit

Sent from my iPhone 5 so I can tell you to search wherever I may be

__________________
2017 Lightning Blue Mustang GT PP 430/402
CJ Pony Parts Lowering Springs | Texas Speed Longtubes | PMAS CAI | Lund Tuned | Borla S-Type Catback
2013 F150 FX4 5.0 - Sold
1998 Jeep Wrangler TJ 4.0 5spd - Sold
2001 Mustang Bullitt - Sold
2005 Level II - Sold
2001 Integra GSR - Sold
1999 XLT - May 2013 TOTM - Totaled

Thanks, I know but I rather keep the original part in case I ever wanna resell or dont like the mod.

__________________
2010 Ranger 4x4 Sport, FX4 stick shifter, 31" Duratrac
Drive it like you stole it, fix it like you own it!

I came across a set of leather heated seat out of an Escape 03 I knew it wasent gonna be a bolt on swap but I hope I can swap the rails and get wiring diagram for the driver side full power seat.

ForumRunner_20130407_174408.jpg

__________________
2010 Ranger 4x4 Sport, FX4 stick shifter, 31" Duratrac
Drive it like you stole it, fix it like you own it!

another seat ?? will 05 x-cab seats fit in my 01 reg cab? i have a torch and a welder lol

__________________
01 Ranger Reg Cab Edge 4.0 SOHC 4x4 4.10

It you swap the tracks it will

__________________
2019 Ford Ranger Lariat Sport Fx4 Crew Cab

2014 Ford F150 STX Sport 4x4 TRADED
2006 Ford Ranger Ext cab 4x4 TRADED
1999 Ford Ranger Reg cab 2wd SOLD

So I got a set of tracks and the weight sensor for the passenger side, does anyone have any wiring diagram for the ranger seats for 2010, I had no luck so far finding it.

__________________
2010 Ranger 4x4 Sport, FX4 stick shifter, 31" Duratrac
Drive it like you stole it, fix it like you own it!

those years tracks are not interchangeable. you will need to swap the tracks with the years that those seats were made.

__________________
Krylon Fusion is for Amateurs.

My drivers seat crapped out in my 94. I went to the yard today and there's a 2000 Explorer with some nice power seats in it.......will these swap exactly for my extended cab? and will I be able to get them power without having to rewire?

__________________
'94 Ranger Super Cab 3.0L Vulcan V6, 4x4 5-speed Manual OD, 160,000 miles and hoping to restore it.

yes, they should bolt right in. as for power, you will have to run a hot and a ground to the seat from the fuse box.

__________________
Krylon Fusion is for Amateurs.