Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 12-02-2010, 05:59 AM
Palidun Palidun is offline
Like the Forums
Join Date: Nov 2010
Posts: 39
Default Adding gauges

Have any of you done any aftermarket gauge installations in a 2003 and later Ranger with a/c that look built in and not "hung on". Can't use the A Frame location because of the grab bar, and top of the dash has slope to it above a/c center outlet. If you have done a neat installation would appreciate photos. Looking to do a 3 gauge install - Trans temp, Vacuum and Oil temp. Thanks
2003 Ranger Edge - Black with black/grey interior. 4.0L engine, cold air induction, cat back exhaust, tune chip. Bilstein shocks, Limited Slip axle, Ultra Gauge
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
adding a/c nvr_done General Ford Ranger Discussion 3 06-03-2010 12:05 AM
adding foglights patrickke Exterior Tech 5 05-21-2010 03:38 PM
94 Gauges zatticus Interior Tech 0 04-21-2010 09:31 PM
adding pics RangerLuc Site Announcements, Comments and Suggestions 2 12-12-2009 05:18 PM
new gauges gntlbn64 Interior Tech 21 11-08-2009 07:55 PM