Re: How to swap seat tracks?
Originally Posted by drppdyllwrngr
but then don't you have to disassemble the backrest off as well? the tracks are tied into the backrest.
in short, there is no simple way to put them in a 98+ reg cab.
your right i had to do this last week when i bought 98 seats. did not fit in my ranger with the stock rails. so i had to change out my 01 rails over to the 98 seats. talk about a lot of work right there!! 4 bolts on the passenger seat 5 on the 60/40 seat aka driver side. plus like you said the 2 bolts on the backrest on each seat. on the 60/40 seat you have to remove the center council then wiggle your socket down in there. but on the passengers seat its not that bad being that there only buckets. taking out 4 seats with no power tools is a bitch man!! lol
-1995 ford ranger prerunner, 4.0, 4x4, 5-speed, 62k original miles, 2.5 radflo bypass front and 2.5 radflo triple bypass rear, deavers f23, 4.56 gears front and back, 07 seats, 07 mirrors, 35x12.50 bfg a/t, 4" fiberwerk glass front and rear, eagle alloy rims, 6k hid heads, two 8k hid off road lights, 34" led light bar, bed/roll cage/engine cage, 25 gallon fuel cell, cut and extended beams/radius arms
-2000 ford SVT f150 lightning -SOLD Lifted 2001 Ford Ranger EDGE, April's 2012 TOTM