I would like to get rid of my bench seat and replace it with some bucket seats. What seats would work without any/much modification?

I think anything up to 1994 will bolt right in

I just finished putting 1998 seats in my 89 ranger it was not a direct swap

__________________

Ok. Thanks!

Sbrodkorb have you done the seat swap yet? I'm looking to do the same in my 86.

__________________
1986 Ranger. 2.3L 5 speed manual.

I believe the seats from any RBV up to 91 are direct bolt in, after that you will need to retain your seat rails. I have been upgrading the interior of my 86 B2. It is now gray, (that was not offered until the 89 model year I believe, got tired of the Canyon Red). The high back bucket seats are from an Explorer of the mid 90's vintage, the seat rails are from a 91 Explorer Sport, these were direct bolt in. The seat pads, and back pads, actually came from three different Explorers. If any one is interested I can make a "How To" on putting this together.

Ray

That would probably be very helpful clem. but your info you just provided is also helpful so thank you!

__________________
1986 Ranger. 2.3L 5 speed manual.

My brother just gave me some newer Mustang seats. Those are going in soon, pics will be up when I'm done.

__________________
1984 Ford Ranger Reg. Cab 2.0L 4SPD 2WD 3.73 8.88 Rear End, No cat 2 1/4 exhaust piped to side exit Diesel tip