Looking for how-to on removing entire dashboard from a 2010

phantom_ranger2010 · #1 03-22-2020, 05:28 PM

Hi, I've searched multiple forums high and low it seems as well as YouTube and I'm totally stuck on removing my dashboard. I'm currently installing sound deadening mat in my ranger and would like to put some on the firewall between the engine bay and cab but there's too much in the way so I am trying to remove the dashboard. Any help would be super appreciated, thank you!

Sent from my SM-G986U using Tapatalk

Levalexi · #2 05-16-2020, 06:02 PM

Did you ever get this done? It's a pretty involved process that requires removing the steering wheel.

There's 2 13mm bolts driver side, 1 under the steering column,1 or 2 around the airbag,1 passenger side. There's 3 on top under the vent trim panel.

You need to unplug the harness on the firewall under the fusebox. That's a 10mm.

Before you do any of that, I'd suggest removing all the connected plugs first.

Redneckstone · #3 05-17-2020, 05:14 AM

Tons has to be removed almost the whole dash has to be dissembled couple hiding bolts. I’ve had to do it once. Good luck and enjoy the rattles after.