Re: A/c rebuild help
I think the AC setup is basically the same for all the trucks. the lines are not very expensive, and they are probably both into a manifold on the back of the compressor.
The lines are apparently made by two companies that I can find, UAC and four seasons.
you have a newer truck so there's a good possibility you do not have a high side connector and just as well they are nothing but trouble. You can check temperature of the discharge line and look up corresponding pressure, that line gets very hot, sooner or later the high side connection will leak, and the plastic caps get soft from the heat and will also leak.
__________________
93 XLT 4.0 FWD auto. Denise, Bristol PA, old broad with old truck
Last edited by Denise93XL4wd; 06-26-2018 at 04:52 PM.
|