plz let me know! = ) pictures very much appreciated

__________________
my lil prerun run... tires and junk cool tube bumpers, fiberglass, cool colored lights, loud bass and a tire rack so you know im cool

buy or make a panel removal tool, and start at any point between the panel and door, gently prying the panel off. Any parts house will have the tool.

__________________
'02 XLT ext. cab 4.0 4x4 Off Road
Usual mods
Unusual color
Only a real man can pimp DWB

There are no screws holding this on, just push type plastic pin things. So just pull it towards you.



U will need a pin removal tool or take a dinner fork. Pull the pins out of the door and replace them into the door panel before reinstalling.

__________________

I just told you how to do this last night. How did you not get it? Haha

__________________
Mods: Xcal 2, K&N Drop-In, Line-X, DSG Heads/Corners, 6000k Hi/Low HID's, 6K HID Fogs, Foglight Mod, Throttle Cable Mod, 6.5" Digital Designs, Rockford P400.4, 2 Sundown SA-15's, MB Quart DSC 2000.1d, Cranked T-Bars, 285/75/R16 Nitto Terra Grapplers

http://www.fordrangerforum.com/inter...-speakers.html

__________________
2006 Ford Ranger Sport 4.0 2WD on 32x11.50R15s
-3" Doetsch Spindle Lift


Using the forum:
How to Post on the Forum
Creating a signature (do this before asking any questions)
Upload an Avatar (image of your Ranger)
How to Post Pictures on the Forum
Switch the site layout: Light Theme or Dark Theme

Things to do:
Participate in Truck of the Month
Participate in the Ranger Photo Contest
Participate in the Non-Automotive Photo Contest
Become a Site Contributor
Shop at the FordRangerForum.com Store

so? do i need to buy new pins?

__________________
my lil prerun run... tires and junk cool tube bumpers, fiberglass, cool colored lights, loud bass and a tire rack so you know im cool

oh and ranger101 i made this one b4 i talked to u =P

__________________
my lil prerun run... tires and junk cool tube bumpers, fiberglass, cool colored lights, loud bass and a tire rack so you know im cool

Oh ok LOL And no you don't need new pins. You'll just need to pull your old ones out of the doors.

__________________
Mods: Xcal 2, K&N Drop-In, Line-X, DSG Heads/Corners, 6000k Hi/Low HID's, 6K HID Fogs, Foglight Mod, Throttle Cable Mod, 6.5" Digital Designs, Rockford P400.4, 2 Sundown SA-15's, MB Quart DSC 2000.1d, Cranked T-Bars, 285/75/R16 Nitto Terra Grapplers

Justin! If it's not S4's it's Rangers huh? Dcass08 from Audizine. I have the same problem. Did you ever figure out how to remove stuck doors? Both of mine are stuck and I'm replacing one due to rust.

wow this was forever ago! yah its real easy, just get something in there to pry it, just have to pull a bit.

__________________
my lil prerun run... tires and junk cool tube bumpers, fiberglass, cool colored lights, loud bass and a tire rack so you know im cool