Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 03-27-2016, 09:22 AM
jasper19 jasper19 is offline
Learning to use the forums
 
Join Date: Mar 2016
Posts: 1
Default 09 ranger xlt ext cab 4.0 blend door actuator

Having trouble getting the blend door actuator off. Cannot get to the screw in the back. Any suggestions would be appreciated.
Reply With Quote
  #2  
Old 04-11-2016, 05:28 AM
fastblackmerc fastblackmerc is offline
Learning to use the forums
 
Join Date: Jul 2009
Posts: 6
Default Re: 09 ranger xlt ext cab 4.0 blend door actuator

I just did this on my 1998 Ranger.
  1. Disconnect the battery
  2. Remove the defroster trim
  3. Remove the two defroster vent screws (8mm(?))
  4. Remove the left and right kick panels
  5. Remove the 6 bolts that secure the dash - 2 on the left side, 2 on the right side and 2 in the middle near the defrost vents. I believe they are 15mm.
Reply With Quote
  #3  
Old 04-11-2016, 07:15 AM
EaOutlaw1969 EaOutlaw1969 is offline
Ford Ranger Driver
 
Join Date: Jul 2015
Posts: 901
Default Re: 09 ranger xlt ext cab 4.0 blend door actuator

I am not sure if the 09 is the same as my 2002 yet this is what is called for the 02 ranger

Disconnect the battery

Rotate the temperature control knob to the full COOL position.
Remove the passenger air bag module.
Vehicles With Anti Theft/Keyless Entry

Remove the screws and position aside the anti theft/keyless entry module.
All Vehicles

Detach and position aside the electrical connector.

Detach and position aside the RH demister hose.

Release the two clips and detach the temperature blend door control cable.

Remove the defroster opening grill.

Working through the opening near the RH defroster nozzle, remove the screw.

Remove the screws and remove the temperature blend door actuator.
INSTALLATION

To install, reverse the removal procedure.
If installing a new temperature blend door actuator, rotate the control shaft to the full COOL position
__________________
2002 Ford Ranger 2 Dr Standard cab 2.3 5 SPD 7.5 373 gears
Reply With Quote
  #4  
Old 04-11-2016, 09:24 PM
rangergambler rangergambler is offline
Ford Ranger Driver
 
Join Date: Aug 2014
Posts: 826
Default

Squeeze ure hand in there. U need a 90 degree 1/4 ratchet unscrewing the screw. Also at the same time have a telescoping magnet so screw dont get lost, it has to be making contact as u unscrew it so it dont get lost.
__________________
2010 2.3 Stick Reg Cab XL - Maxtrac 2 inch coils - Bilstein 5100 front shocks - Bilstein yellow rear shocks
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale: 2000 ford ranger xlt ext cab 4 door aep2112 Trucks 1 02-20-2015 11:01 AM
blend door actuator bones5757 Introduce Yourself 4 11-02-2012 06:24 AM
blend door actuator 12jjs12 Electrical Tech 0 10-21-2009 12:33 PM
2001 Ranger XLT ext cab door panel Boujiboy2000 Interior Tech 1 10-12-2009 06:12 PM