For some reason the bracket on ohc wont work on my truck (nowhere to drill for slots or screws) I tryed to bend it cuss at it no go.The ohc came out of 1998 Exployer and was going into a 96 reg cab Ranger. I have the headliner out (going to recover it).Any thoughts or am I a dum.

__________________
1996 Ranger XLT reg cab 2wd
2.3 and 5spd
3 inch PA body lift & new stock bushings
Flowmaster Delta 40 muffler
New 15 Outlaw wheels
No mods to the motor yet

the holes aren't there. you have to drill them

__________________
Krylon Fusion is for Amateurs.

yup but dont drill to far or you will go all the way through!!..and your gonna need to cut your headliner http://www.fordrangerforum.com/inter...e-install.html

__________________
"I thought this was America!"-Randy Marsh

2003 fx4 4.10, maxed tbars, 5000k HIDS 3157 silverstar bulbs, expo ohc, alons mag light holder, 06+ tails, throttle cable mod, air box mod
360tag:BEEFS7A7US

Thanks.
Knew I had to drill. I am confused because bracket doesn't sit right when you put up to the roof.

__________________
1996 Ranger XLT reg cab 2wd
2.3 and 5spd
3 inch PA body lift & new stock bushings
Flowmaster Delta 40 muffler
New 15 Outlaw wheels
No mods to the motor yet

pics?

__________________
03 RANGER EDGE 3.0
60/40 Seat Mod, Expo Full Console, Expo Mod Diff Cover, Thunderbolt Signal Mirrors, Flowmaster, Billet Grills, One Piece Halo Projector Headlights, HID Fogs w/Halos,
LED Lightbar, Euro Taillights, Interior Accents Painted, OHC, Indigo Cluster, 7" LCD Headunit, Mustang Dome Light, Manik Brush Guard
PNW CREW

facing the right way?or clean up the holes that could be the prob just too much metal build up around the holes cuz ive ran into that prob with other mods

__________________
"I thought this was America!"-Randy Marsh

2003 fx4 4.10, maxed tbars, 5000k HIDS 3157 silverstar bulbs, expo ohc, alons mag light holder, 06+ tails, throttle cable mod, air box mod
360tag:BEEFS7A7US

Ok here are a few pics.

Attached Images

	SD530511.jpg (90.5 KB, 38 views)
	SD530512.jpg (95.8 KB, 35 views)
	SD530513.jpg (95.8 KB, 32 views)
	SD530514.jpg (94.0 KB, 29 views)

__________________
1996 Ranger XLT reg cab 2wd
2.3 and 5spd
3 inch PA body lift & new stock bushings
Flowmaster Delta 40 muffler
New 15 Outlaw wheels
No mods to the motor yet

i feel like putting your headliner back in will make it a bunch easier for positioning it

__________________
"I thought this was America!"-Randy Marsh

2003 fx4 4.10, maxed tbars, 5000k HIDS 3157 silverstar bulbs, expo ohc, alons mag light holder, 06+ tails, throttle cable mod, air box mod
360tag:BEEFS7A7US

U just gotta drill ur holes and slots into the brace

__________________

I have a 97 reg cab and I could not use the bracket for it. I tried at first but the console had about a 1 inch gap between it and the headliner. All I did was dremel the slots for the front of the console and used self-tapping screws for the back of itThis might help. I will try to get some pictures of mine tomorrow for you.

__________________
97 Ranger 2.3l 4x2, Pro comp 5/3.5 lift, Helo 17x8 rims, Toyo Open Country A/T, Blow thru with 2 12" fi Q's subs, audioque 2200 watt amp, Crescendo component speakers, Pioneer head unit

Here are some pictures of mine and how it was mounted.
Used the holes to mount the console to the roof frame instead of the bracket

Dremeled slots just wide enough for the clips to pop in. I also made them a little long so I could slide the console front or back to get it where I wanted it.



Hope this helps.

__________________
97 Ranger 2.3l 4x2, Pro comp 5/3.5 lift, Helo 17x8 rims, Toyo Open Country A/T, Blow thru with 2 12" fi Q's subs, audioque 2200 watt amp, Crescendo component speakers, Pioneer head unit

yea i used a grinder for mine, just be careful if you go that route, because the sparks can set ur headliner on fire. But mine turned out just fine, the hardest part is cutting your headliner and tryin not to freak out about it lol

__________________

2003 | XLT | Extended Cab | V6 | 4x4 | 4.0L SOHC | 3 Inch Body Lift | Cranked T-Bars | TJM Wench Bumper | Blacked Out Heads | Fog Light Mod | Surround Delete Mod | Blinker Mod | Custom Center Console | OHC | Pacer Bullet Rims | 33x12.5 All Terrains | 1 Inch Wheel Spacers