i have a 94 motor and trans are gone and computers gone and i wanna convert to a 96 can and will the dash and all the wiring fit ? cause i wanna convert it over

dash mounts differently

__________________
2021 F150 5.0 Screw

Past:18 F150 2.7, 16 F150 5.0, 14 F150 5.0, 07 F150 5.4, 03 Ranger 4.0

Master Certified Ford Parts / Warranty Admin

Nope will need a lot of modding

Just part it out and buy a 96

__________________
95 Ranger XLT 4x2 2.3 I4 5 speed 206,000 *dead*
96 Ranger XLT 4x4 4.0 V6 5 speed 173,000 *alive*
D35 front, 8.8 rear, 3.73 gears, limited slip rear diff

as stated, mounts different. not to mention the firewall is different, hvac is different, etc.

__________________
Krylon Fusion is for Amateurs.

ok well not selling the frame cause my 96 motor fits in it i have the 4cyl 2.3 and that 94 had a 2.3 4cyl but i'm gonna change the cab the motor was spitting oil out of the exhaust and i think it jumped the timing i reset the timing but engines out of truck and the trans is toasted gears are really warn 200,000 plus

well i'm gonna get another engine and trans and another ecu but one from a truck i find with low miles plus some wires which caused half the issues

well i'm getting a new motor and trans from another car and all new wiring and ecu so i can make this truck live and drive again anyone want my old motor which is good i'm getting rid of it just want a newer motor and newer trans i have the ecu to the motor i live in ct so anyone want they can have first dibs on the extra parts i have