 |
 |
 |
|
#1
04-06-2010, 04:25 PM
|
||||
|
||||
will 2005 gauges work in a 1999?
will 2005 gauges work in a 1999? because there is one at the jy
__________________
1999 2 wd4 cyl2.5l5 spd135k MODS:5% tint all around Night Shades (Extra Dark)Corners Thrid BrakeTails Air silence removed 2006 Mirrors Flowmaster Super 44 (Weld on & Turn down) 35W 5000K Hids 
|
 |
 |
| Register and never see these ads again. | |
|
|
|
|
|
#2
04-06-2010, 04:27 PM
|
||||
|
||||
|
Re: will 2005 gauges work in a 1999?
Not that I know of because 04+ have digital odometers.
__________________
2002 XLT 4X4 Mods: Xcal 2, K&N Drop-In, Line-X, DSG Heads/Corners, 6000k Hi/Low HID's, 6K HID Fogs, Foglight Mod, Throttle Cable Mod, 6.5" Digital Designs, Rockford P400.4, 2 Sundown SA-15's, MB Quart DSC 2000.1d, Cranked T-Bars, 285/75/R16 Nitto Terra Grapplers
Auto 4.0L SOHC 8.8 w/ 4.10 L/S
|
|
|
|
|
|
#4
04-06-2010, 04:29 PM
|
||||
|
||||
|
Re: will 2005 gauges work in a 1999?
oh ok that good
__________________
1999 2 wd4 cyl2.5l5 spd135k MODS:5% tint all around Night Shades (Extra Dark)Corners Thrid BrakeTails Air silence removed 2006 Mirrors Flowmaster Super 44 (Weld on & Turn down) 35W 5000K Hids
|
|
|
|
|
|
#5
04-06-2010, 05:42 PM
|
||||
|
||||
|
Re: will 2005 gauges work in a 1999?
So -04 fit tho?
__________________
'99 Ford Ranger 4x4, 4.sl0w, Auto, 3" BL, 2" Torsion Crank, 2" blocks, 31x10.50,
|
|
|
|
|
|
#6
04-06-2010, 05:42 PM
|
||||
|
||||
|
Re: will 2005 gauges work in a 1999?
03 and back work perfectly.
__________________
2002 XLT 4X4 Mods: Xcal 2, K&N Drop-In, Line-X, DSG Heads/Corners, 6000k Hi/Low HID's, 6K HID Fogs, Foglight Mod, Throttle Cable Mod, 6.5" Digital Designs, Rockford P400.4, 2 Sundown SA-15's, MB Quart DSC 2000.1d, Cranked T-Bars, 285/75/R16 Nitto Terra Grapplers
Auto 4.0L SOHC 8.8 w/ 4.10 L/S
|
|
|
|
|
|
#7
04-06-2010, 05:44 PM
|
||||
|
||||
|
Re: will 2005 gauges work in a 1999?
Anything from 1995 - 2003 will work maybe wrong on the 1995 it may be closer to 1997
|
|
|
|
|
|
#8
04-06-2010, 05:45 PM
|
||||
|
||||
|
Re: will 2005 gauges work in a 1999?
96-03 Will work. You were close.
__________________
2002 XLT 4X4 Mods: Xcal 2, K&N Drop-In, Line-X, DSG Heads/Corners, 6000k Hi/Low HID's, 6K HID Fogs, Foglight Mod, Throttle Cable Mod, 6.5" Digital Designs, Rockford P400.4, 2 Sundown SA-15's, MB Quart DSC 2000.1d, Cranked T-Bars, 285/75/R16 Nitto Terra Grapplers
Auto 4.0L SOHC 8.8 w/ 4.10 L/S
|
|
|
|
|
|
#9
04-06-2010, 05:46 PM
|
||||
|
||||
|
Re: will 2005 gauges work in a 1999?
Coolio
__________________
'99 Ford Ranger 4x4, 4.sl0w, Auto, 3" BL, 2" Torsion Crank, 2" blocks, 31x10.50,
|
|
|
|
|
|
#10
04-07-2010, 04:20 AM
|
||||
|
||||
|
Re: will 2005 gauges work in a 1999?
95 is the same as a 96-97. so 95-03. you may have to swap around the temp gauge if you get one from a 95-97 or so. some have a resistor, others don't.
__________________
Krylon Fusion is for Amateurs.
|
|
|
|
|
|
#11
04-07-2010, 04:43 AM
|
||||
|
||||
|
Re: will 2005 gauges work in a 1999?
you could swap a 04+ gauge. You would just have to figure out each wire and splice them. your odometer wouldnt work but everything else would.
|
|
|
|
|
|
#12
04-07-2010, 06:56 AM
|
||||
|
||||
|
Re: will 2005 gauges work in a 1999?
oh ok thanks everyone
__________________
1999 2 wd4 cyl2.5l5 spd135k MODS:5% tint all around Night Shades (Extra Dark)Corners Thrid BrakeTails Air silence removed 2006 Mirrors Flowmaster Super 44 (Weld on & Turn down) 35W 5000K Hids
|
|
|
|
|
|
#13
04-07-2010, 05:03 PM
|
|||||
|
|||||
|
Re: will 2005 gauges work in a 1999?
Quote:
04+ are married to ECU and SJB.
__________________
Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend. Quote:
Quote:
Quote:
Quote:
|
|
|
 |
«
Previous Thread
|
Next Thread
»
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1988 Temp and fuel gauges don't work | JeremyC | Electrical Tech | 1 | 01-17-2011 08:00 AM |
| 1999 lights work but won't turn over | elnoseface | 4-Cylinder Tech | 0 | 02-23-2010 04:58 PM |
| gauges do not work. help a newbie out! | rumpranger | Electrical Tech | 2 | 11-26-2009 12:53 PM |
| new gauges | gntlbn64 | Interior Tech | 21 | 11-08-2009 08:55 PM |
| What Gauges will fit? | 02BlueRanger | Interior Tech | 6 | 10-01-2009 11:17 PM |
|
|
 |
|
|
 |
 |
 |
