my whole interior is lit up with buggman leds. safe to say you'd need sunglasses when all the lights are on haha

When you get back to making these let us know. I'd like to get the setup for the OHC and the regular interior dome light unit.

__________________
95 Mazda B2300 : +370K miles : Original engine/trans : 2" Lift : 30" Tires all around : Rollbar & Bed Rails & Step Rails

Will do.
I'm in the middle of a handful of 3rd brake lights right now, but as soon as I'm done with these it's back to ohc's for a while

__________________

go ahead and chalk me up for one of those as well. :P

__________________
95 Mazda B2300 : +370K miles : Original engine/trans : 2" Lift : 30" Tires all around : Rollbar & Bed Rails & Step Rails

Mine too. Love it!

__________________
1997 B2300 reg cab 2.3 Lima, 15x8.5 Mickey Thompson classic 2, 31x10.50 cooper discover at3, 7.5 open 4.10 rear, dynomax super turbo catback, alpine iva-w200 w/ nav, kicker 6x8s, alpine type R 8, alpine 250W mono amp, power bass 400.4, tool box & camper shell, compustar alarm/remote start.
1956 Ford F100 rust bucket with big plans!

FINALLY!!
I have TWO new 2014 model OHC led panels finished & ready to go.
They're very similar to all my other models with a few small enhancements here & there.
These have silver painted circuit boards with 5mm led's. After some testing, I think the silver boards give a little bit of reflection that the white boards didn't.

I know there have been a few people asking about them so I'm going to give them first shot at them. So if you've been on the waiting list for one PLEASE drop me a PM ASAP & you'll have one reserved.

Not sure if I'll have any more ready before Christmas, but I'm gonna try to get a couple more in between 3rd brake lights if possible.

__________________

One is spoken for, One left

__________________

i got a gray OHC, mounting bracket, pigtail and temp sensor if you wanna mod another

__________________
2002 Ford Ranger EDGE: 4 inch spindle lift, 2 inch add a leaf, 33x12.5xR15 BFG All Terrrain KO2, Black bullethole steel rims, camo center console mod, diamond plate toolbox, 102 inch cb whip, tinted tails/corners, throttle cable mod, headlight mod, blinker mod, air box mod, Fog light mod.

Last one is spoken for.

Stay tuned for when I have a couple more ready to go.

__________________

UPdate!

Just finished up with a few more ohc led panels!!





I have 5x of my standard 2014 model with 48 5mm led's above and I have one with 60 5mm led's that I started a while back but just completed. The 60 led has a little paint overspray on the back (black area) doesn't affect the workings at all, just not as pretty as the others. It also doesn't have voltage regulators like the rest but I've ran them all up to 15vDC without any issue.



I'll let the 60 led model go for the same as the 48 led models, $25 +sh.

I may take a couple of the 48 led models to post on my ebay but they'll be a bit more expensive there due to all the fees
As always I want to give all my ranger peeps first shot at my mods.

__________________

OOOOH DIBS! You already have a PM from me from a few days ago. Oddly enough my console just showed up today.

__________________
2013 Ford Focus SE hatch - My daily driver
2018 Chevy Equinox diesel- Wife's
2001 Ford Ranger XLT 4x4 4.0 Supercab Off-Road Stepside - Bunch of stuff.