$50
Selling my custom Nexus 7 dash install project. I went another route for a smart media hub and no longer use this. Some things to consider if you wish to buy this:
-You will need to polish the finish under the vinyl since it requires an almost perfectly smooth finish to stick properly. You can see in some of the tight inside corners it pulls up. If this sounds like too much, remove the vinyl and paint it to what ever color you would like.
-This requires a head unit relocation or some other type of sound amplification. The ROM does support audio over USB so you can use a DAC (Digital Audio Converter) to an amplifier.
-The power supply/USB hub is plug and play, just need to add power to the relay.
-Bezel does not come with 4x4 switch, 12V plug, fog light switch or cigarette lighter, you will need to supply your own.
-Tablet will be reset to fresh settings, I can supply instructions on how to make it like my setup or you can set it up as you please.
-The face plate was a 3D print and warped a little from the printing process, you will need a strong tape to hold it to the tablet.