|
01-12-2014, 02:38 PM
|
|
...............
|
|
Join Date: May 2009
Posts: 23,399
|
|
Re: Headlight Mod for 2001-2010
Quote:
Originally Posted by smdaversa
I'm having a lot of trouble getting the headlights apart.. Started off at 170 for 60 minutes (5 minute increments per the guide) with no results. Bumped it up to 200 degrees for another 60 minutes (also at 5 minute increments).
Does anyone have any suggestions? I didnt imagine getting them apart would be this frustrating.. haha.
Also, I'm using a brand new pair of OEM replacement headlights that I ordered from Rock Auto a couple of weeks ago. I don't know if this will make a difference as opposed to me using the stock housings from 04.
|
Just gotta keep at it. I spent probably 3 hours on a set from ford.
they have not seen sun light uv rays so will take time.
Suggest put in for 10 minute intervals to help some more. Use a flat blade screw driver and try to get some to separate and continue to heat.
__________________
2005 Edge
|
|
|
|
Register and never see these ads again. |
|
01-12-2014, 03:21 PM
|
|
Liking the Ford Ranger Forum
|
|
Join Date: Sep 2013
Posts: 17
|
|
Quote:
Originally Posted by STL
Just gotta keep at it. I spent probably 3 hours on a set from ford. they have not seen sun light uv rays so will take time. Suggest put in for 10 minute intervals to help some more. Use a flat blade screw driver and try to get some to separate and continue to heat.
|
Thanks Myke. It looks like I'm going to have to wait until I get another Sunday off from work. Itching to finally get the lights open and do my retrofit.
__________________
2004 FX4 Level II
4.0L V6 SOHC 4WD 31x10.50 R15
06 Mirror Swap | MBRP xP Series Exhaust | IPCW LED Tailgate Bar | LED Third Brake Light
|
01-12-2014, 03:27 PM
|
|
oh fk yeah bud!
|
|
Join Date: Oct 2012
Posts: 678
|
|
Re: Headlight Mod for 2001-2010
can any body tell me where i can get just the lenses? the used ones i bought are beyond repair...
__________________
four by four, CB radio & a gps. all you really need
|
01-12-2014, 04:51 PM
|
|
...............
|
|
Join Date: May 2009
Posts: 23,399
|
|
Re: Headlight Mod for 2001-2010
Quote:
Originally Posted by smdaversa
Thanks Myke. It looks like I'm going to have totect t until I get another Sunday off from work. Itching to finally get the lights open and do my retrofit.
|
If it is sunny out during the week I suggest setting them out side in direct sunlight.
Quote:
Originally Posted by weathermaker
can any body tell me where i can get just the lenses? the used ones i bought are beyond repair...
|
Never seen just buying the lens anywhere online.
__________________
2005 Edge
|
01-12-2014, 05:31 PM
|
|
oh fk yeah bud!
|
|
Join Date: Oct 2012
Posts: 678
|
|
Re: Headlight Mod for 2001-2010
Quote:
Originally Posted by STL
Never seen just buying the lens anywhere online.
|
gaaahhhhh,
might have to look for a nice junk yard set, or buy cheap assemblies of amazon or something
__________________
four by four, CB radio & a gps. all you really need
|
03-25-2014, 01:49 AM
|
|
Steel slingin'
|
|
Join Date: Feb 2014
Posts: 43
|
|
Re: Headlight Mod for 2001-2010
Any problems of paint chipping or moisture in the housing? Im thinking of buying the same black housings for $100 but if this mod is good and worth it ill do the cheaper route
__________________
2004 4.0 FX4
3” body lift
33” toyo MT
15x10 fuel anza
T.A.G. Front bumper
Custom rear bumper
|
03-25-2014, 04:45 AM
|
|
dogrunner
|
|
Join Date: Mar 2013
Posts: 1,271
|
|
Quote:
Originally Posted by ironranger
Any problems of paint chipping or moisture in the housing? Im thinking of buying the same black housings for $100 but if this mod is good and worth it ill do the cheaper route
|
i had paint chipping wen masking the headlight dishes and hav no idea how im gunna so this mod :/
__________________
2002 Ford Ranger EDGE: 4 inch spindle lift, 2 inch add a leaf, 33x12.5xR15 BFG All Terrrain KO2, Black bullethole steel rims, camo center console mod, diamond plate toolbox, 102 inch cb whip, tinted tails/corners, throttle cable mod, headlight mod, blinker mod, air box mod, Fog light mod.
|
03-25-2014, 06:00 AM
|
|
Ford Ranger Driver
|
|
Join Date: Dec 2013
Posts: 1,609
|
|
Quote:
Originally Posted by ironranger
Any problems of paint chipping or moisture in the housing? Im thinking of buying the same black housings for $100 but if this mod is good and worth it ill do the cheaper route
|
I've had mine done for 2 or 3 months and no paint chipping or moisture in the lights. It's hard for any paint to chip because it's enclosed. And as far as moisture there is a vent in the light.
Hasn't been an issue for me or my buddie that has done it
__________________
Too much, look at my build thread
|
03-25-2014, 05:32 PM
|
|
...............
|
|
Join Date: May 2009
Posts: 23,399
|
|
Re: Headlight Mod for 2001-2010
Quote:
Originally Posted by ironranger
Any problems of paint chipping or moisture in the housing? Im thinking of buying the same black housings for $100 but if this mod is good and worth it ill do the cheaper route
|
Recommend tub and tile clear sealant and really put a lot on there. I have not had any chips or moisture and I have had mine for a long time.
__________________
2005 Edge
|
03-26-2014, 02:47 AM
|
|
Steel slingin'
|
|
Join Date: Feb 2014
Posts: 43
|
|
Re: Headlight Mod for 2001-2010
Quote:
Originally Posted by 02Fx4red
I've had mine done for 2 or 3 months and no paint chipping or moisture in the lights. It's hard for any paint to chip because it's enclosed. And as far as moisture there is a vent in the light.
Hasn't been an issue for me or my buddie that has done it
|
Quote:
Originally Posted by STL
Recommend tub and tile clear sealant and really put a lot on there. I have not had any chips or moisture and I have had mine for a long time.
|
Quote:
Originally Posted by floridacracker
i had paint chipping wen masking the headlight dishes and hav no idea how im gunna so this mod :/
|
Thanks alot guys! Im glad to find an easy cheap way to do this, save a bit for other mods
__________________
2004 4.0 FX4
3” body lift
33” toyo MT
15x10 fuel anza
T.A.G. Front bumper
Custom rear bumper
|
03-26-2014, 05:00 AM
|
|
"Pick up Man" Joe diffy
|
|
Join Date: Aug 2012
Posts: 1,969
|
|
I have a set forsale check out my thread.
__________________
2001 Ford Ranger Edge, 4.0L V6, 4x4, automatic, Extended cab, 165,000 miles, 8.8 rear axle, Auburn L/S, 4.10 gears, body lift, 32x11.5r15 falken wild peak A/T, head light mod, black honeycomb grille. 06+ corners, fx4 seats, led back up light
MODS TO COME: pillar gauges, recover seats, stereo and that it for now ................
|
05-16-2014, 08:34 AM
|
|
Never-A-Dime
|
|
Join Date: Nov 2012
Posts: 1
|
|
Re: Headlight Mod for 2001-2010
Hi been a member a bit never posted. Bought an 02 edge in December. Thinking of color matching the head and corners hope it look good. I seen the one small piece in the color match headlight mod thread and looks pretty decent. I just dont think the black would look that good with my bright red truck IMO. but stl truck looks good.
Last edited by sk8rbrdly11; 05-16-2014 at 09:05 AM.
|
11-10-2014, 08:03 AM
|
|
Still learning!
|
|
Join Date: Jan 2014
Posts: 134
|
|
Re: Headlight Mod for 2001-2010
Hope to get this done before I do the 01-03 swap! Thanks for the info!
__________________
1999 XLT Extended Cab Step-side 4x4
32x11.5x15 Faulken Wildpeaks
Bull bar w/ Baha lights
Throttle Cable Mod
Air Box Mod.
Tinted Windows
AVS Window Visors
AVS Bug Shield
Freedom Bed Cover
2002 XLT 4.0 4x4 (Gone but not forgotten)
|
02-25-2015, 04:03 PM
|
|
Ford Ranger Driver
|
|
Join Date: Jul 2012
Posts: 809
|
|
Working on this right now! I started on the one aftermarket light on my truck and its taking forever.
|
09-02-2015, 01:11 PM
|
|
Ford Truck Driver
|
|
Join Date: Jun 2012
Posts: 91
|
|
My only suggestion I've done this mod and when you cover the light to paint it I found it easy to lay the tape over instead of tryin to get the tape down into the light I'll attach a picture of mine to show what I'm talking about
__________________
1993 2wd ranger no engine mods it was my first truck has tinted windows and black rims, and an exhaust, also have a 2001 4wd ranger with 31" tires aftermarket grillcraft grille, custom exhaust dumps out in front of the tire, tinted windows, kenwood headunit and 1 12" JL W1
|
|
|