Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 09-17-2012, 12:45 PM
Retroboy1989 Retroboy1989 is offline
3 Time Ranger Owner
Join Date: Nov 2011
Posts: 1,078
Default Make Cruise-Control Light Functional

On some early Rangers, Ford neglected to run the wire for the "Speed Cont" dash indicator light. This will apply to 95+ Rangers that came with or without factory cruise control and have never had a functioning cruise light.

It is really simple to make the dash light function as it should.

Basic Concept:
The "Speed Cont" light in our clusters lacks the switched ground wire. Running a wire from the cluster to the cruise control servo will make the light function as it should.

Stuff you will need:
1. One spare pin from a cluster connector (Picture Left)
2. One spare pin from a CC servo connector (Picture Right)
3. Some wire and butt-connectors.

The steps:
1. Remove necessary parts to access gauge cluster.
2. Remove cluster.
3. Make sure there is a bulb in the "Speed Cont" spot.
4. Find the cluster connector #C214 (See Diagram)
4. Open the little "gate" on the back of the connector by carefully prying the tabs on both ends of the connector.
5. Add a pin to slot #4.(See Diagram #1)
(If there is a pin on this spot, then your truck is already wired for the light and there must be another problem)
(NOTE: The pin numbering on 1995 rangers is backwards from 1996+ rangers. 1995 Ranger owners should compare their truck to diagrams #1 and #3 to find the correct pin slot.)
6. Snap the little "gate" closed.
6. Run a wire from your new pin down behind the pedals and out the firewall. The easiest place I could find to pass the wire through the firewall was through the grommet with the hood-release cable.
7. Continue running the wire over to the cruise control servo.
8. Disassemble your truck's cruise control servo connector. Slide your new pin into slot #1 (See Diagram #2). You will need to drill a small hole on the outer connector cover for the wire to pass through. You will be able to look at the other existing wires for reference.
9. Connect your newly-run wire to the new pin on the servo.
10. Re-assemble everything and test out the cruise control. The light should illuminate when the cruise control is engaged.

DIAGRAM #1 (1996+ Rangers, for CRUISE CONTROL LIGHT REFERENCE ONLY!!! Some other pins changed over the years.)


DIAGRAM#3 (1995 Rangers)
Current: 2004 Explorer Sport Trac 4x4 4.0 Auto Sonic Blue Pearl
Sold: 2000 B2500 SE 2wd Medium Willow Green
Sold: 1996 Ranger XLT 4x4 4.0L SuperCab Medium Willow Green
Sold: 1996 Ranger XLT 2wd FlareSide Medium Willow Green

Last edited by Retroboy1989; 09-19-2012 at 09:19 PM.
Reply With Quote
Old 08-19-2017, 07:20 AM
shutchman shutchman is offline
Learning to use the forums
Join Date: Aug 2017
Posts: 1
Default Re: Make Cruise-Control Light Functional

can't see photos. is the photobucket link working for this thread?
Reply With Quote
Old 08-23-2017, 06:59 PM
bigfisher bigfisher is offline
Mustang Owner
Join Date: Mar 2012
Posts: 14,054
Default Re: Make Cruise-Control Light Functional

Mine isnt
2017 Lightning Blue Mustang GT PP 430/402
CJ Pony Parts Lowering Springs | Texas Speed Longtubes | PMAS CAI | Lund Tuned | Borla S-Type Catback
2013 F150 FX4 5.0 - Sold
1998 Jeep Wrangler TJ 4.0 5spd - Sold
2001 Mustang Bullitt - Sold
2005 Level II - Sold
2001 Integra GSR - Sold
1999 XLT - May 2013 TOTM - Totaled

Originally Posted by 2004 fx4 level II
fuckin Nissan shhhiitttttttttt!!!!!!!!!!!!!!!!!!
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cruise control light replacement Centrarchid 4x4 Interior Tech 8 05-16-2014 01:01 AM
Want to Buy: cruise control, dome light, arm rest top ludgate124 Interior Parts 3 10-12-2012 04:18 PM
No dash lights parking lights or cruise control light? Rangerguy321 Electrical Tech 3 03-25-2012 09:07 PM
Light out in my cruise control button 02 silver skull Interior Tech 7 03-04-2011 12:01 PM
cruise control light went out :( Ranger_EDGE Interior Tech 2 11-03-2009 11:32 PM