Might be off topic, but can slotted rotors be surfaced??

what pads would be used with the conversion as far as brake pads for the new rear disc brakes??? Would the ford brake pads fit??

Will the Currie Enterprises offers Part #: CE-6013C caliper flex hose kit work with the GT brakes? Ive already found everything I need. It says for cobra, how to didnt say if it could be used with the GT's

Yes it will work, I used that kit with my GT brakes.

__________________
2001 Ranger 4x4, 4.0 SOHC, Auto

has anyone had any issues with the mustang rotors hub diameter? I measured the diameter at 2 3/4 while my axle (83 ranger 7.5 with 3.73 gears) at 2 1/2. I didn't pay much attention to this until my brakes started squeaking and when I pulled the the tire off the stud wholes on rotor are now wobbled out, obviously from the 1/4 of free play the rotor has around the axle hub. has anyone else had this issue or have a different rotor that will work?

Thanks a bunch for your help....any advice before I start to do this??

Just take it easy with the welder if your going to weld on the tabs that come with the lines. They not very hard or thick and you'll melt or burn them quick if you put too much heat into them. I messed them up so bad I had to fabricate new ones.

__________________
2001 Ranger 4x4, 4.0 SOHC, Auto

has anyone had a issue with the mustang rotors hub diameter being larger than the rangers axles hub diameter. The hub on my axle measures 2.5" and the diameter on the rotor is 2.75". My brakes started squeaking and when i took the tire off the wholes on the rotor are now wobbled out from the rotor apparently being able to move around on the hub. The lug nuts where not loose either. So i picked up new rotors and theres a good 1/4 inch of play in all directions when the rotor is on the axle.

How long did it take for these parts to come in? Been waiting awhile now. Contacted them via email and they replied IT SHOULD ship out tomorrow. I was like should???

It's been almost a year ago so I don't remember exactly but I don't think they were particularly fast.

__________________
2001 Ranger 4x4, 4.0 SOHC, Auto

Is there another brake line setup I can use instead of the ones provided by carrie?? Its been 3 weekend already and the parts haven't shipped. I contacted them and they said as soon as they get them they will ship them. If so where?? Any local auto stores??

I bought my lines from jegs, I think it was like 40. You just have to find the size of the lines. I think the banjo bolt is 10mm and the other end is 3/8ths

----------

These are the ones I used I think http://www.jegs.com/i/JEGS-Performan...ductId=1682813

Just got the rest of the parts I needed for the conversion! Well almost, I still need to get the brake lines. But I picked up the axle mounts today from a 35th anniversary mustang. Was untouched in the junk yard and the only one not sitting in mud. Now I'm gonna get a can of black caliper paint and clean the calipers and dust shields and mounts and paint everything. Gotta order a new set of pads too. Got the rotors cut for now. Hopefully will be on soon! Then I don't have to worry about the sticky rear drums.

__________________
1997 B2300 reg cab 2.3 Lima, 15x8.5 Mickey Thompson classic 2, 31x10.50 cooper discover at3, 7.5 open 4.10 rear, dynomax super turbo catback, alpine iva-w200 w/ nav, kicker 6x8s, alpine type R 8, alpine 250W mono amp, power bass 400.4, tool box & camper shell, compustar alarm/remote start.
1956 Ford F100 rust bucket with big plans!

Okay, curious as to why the mounts need to be cut? I haven't started the swap yet. Just wondering

__________________
1997 B2300 reg cab 2.3 Lima, 15x8.5 Mickey Thompson classic 2, 31x10.50 cooper discover at3, 7.5 open 4.10 rear, dynomax super turbo catback, alpine iva-w200 w/ nav, kicker 6x8s, alpine type R 8, alpine 250W mono amp, power bass 400.4, tool box & camper shell, compustar alarm/remote start.
1956 Ford F100 rust bucket with big plans!

Because the caliper bracket mounts to the inside (AKA - Backside) of the axle flange.

Random picture from this thread:

__________________
Curent 2003 Ford Mustang Mach 1 owner - Build Thread for her: Logan's 2003 Mach 1

Former 2003 Ford Ranger owner - Build Thread for her: Project Budget Buster