Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 12-14-2009, 02:17 PM
440volt 440volt is offline
Got Boost?
 
Join Date: May 2009
Posts: 16
Default How To: Install KC 130 Watt lights on a WAAG bar

Note- The pictures you see were taken after the lights had been installed for about a year.

Ken

This how to illustrates the installation of a set of 130-Watt KC Daylighters on a WAAG bar. Most aftermarket light installations will be similar. When in doubt, refer to your manufacturers instructions.

Tools needed

Wire strippers
Solderless lug crimpers
Drill motor
Volt-ohm meter or 12Volt test light
Appropriate size socket and ratchet wrench
Phillips Screwdriver

Supplies needed

2 or 3 # 10 screw hole 16 to 14 gage un-insulated Sta Kon lugs ( or equivalent )
Tye Wraps (wire ties/zip ties)
Rubber Splicing tape
2 or 3 #10 self-drilling sheet metal screws
1 14 gage wire, ¼ inch bolt hole insulated Sta Kon lug

KC lights come with all required wire, a switch (with “on” LED indicator, wire taps, plastic split wire loom material, a relay, the lights themselves, and detailed installation instructions. If you are using another brand of light, or have bought yours used, you may have to purchase these items separately.

The first thing to do is read all of the instructions. If you do not understand, stop and ask for help! This may save you lots of heartache and frustration later.

Safety Warning!!
It is always good practice to disconnect the battery negative cable whenever working on the electrical system of your truck. Shorts to ground from a hot circuit can fry your truck’s computer, among other damage. It’s not fun to have a very large, very heavy, relatively expensive paperweight sitting in your driveway!

OK, lets get started. I mounted the lights on the bar first, because it was right there in front of me. The mounting bolt on the KC lights is the same size as the holes WAAG punches in the bar and caps with a plastic cap at the factory.

The pic below shows what comes in the kit.





This is a pic of the wiring diagram from the KC instructions. This should be typical for any make or model of off road lights.





The next pic shows where I mounted the relay. The relay supplied was watertight and the lugs on the wiring came with soft plastic “boots” so the unit is fairly water resistant as shipped. I chose a location on the inner fender, just under the fender to wheel tub flange. I felt this would keep it out of harms way and still be accessible. The mounting location is entirely up to you, just be sure that you have enough wire to reach all the necessary connections.





The relay will have a ground lead coming from it. I chose to lug the ground wire coming from the relay and use a self drilling screw to create my own ground point. Some folks may feel the need to remove the paint under the lug, I didn't find it necessary. If you do remove paint, you may want to coat the area with some kind of anti oxidant or conductive paste (available at electrical supply places including chain stores such as Lowes or Home Depot). Regular axle bearing grease will work as well. Use just a small amount. The idea here is to reduce the amount of rust/ corrosion that will form.

Now a couple words about Scotch 23 splicing tape. This is a self-vulcanizing rubber splicing tape. What that means is that as you wrap the tape (it has no adhesive or glue on it) around what you are trying to seal, stretch the tape out. It can be stretched to 33% of it’s original length. The tape will “stick” to itself and form a watertight seal. Overlap the wraps by ½ the width of the tape and you will have an excellent water tight covering over your electrical connections.
This stuff is available at electrical supply houses and may not be cheap. However, it is pro quality stuff and a roll should last for years. I have personally used this stuff on 800 amp, 440Volt AC connections at work that have been exposed to the elements in all seasons with no problems.

click here for a link to 3M's website about this tape.

That is the tape you see in the following picture of how the lights are connected to each other. One is simply "tapped" into the wire for the other. This single wire then goes back to the relay. This connection is in front of the radiator and right behind the grill.

The pic shows the wire tap connection covered in rubber tape, and the wire loom on the wire. The plastic wire loom is split on one side so it is easy to push it apart with your thumb and slip the wire inside.





KC provides a generous amount of both wire and wire loom. I simply cut the wire to fit.
I used black Ty wraps. They are black to resist ultraviolet light degradation. White Ty wraps become brittle over time because of this.
Ty wraps (zip ties if you like) are available in a host of colors for decorative reasons. The black ones actually are that color for a reason, lol. I use Thomas and Betts products because in my years of experience on the job, their product is of just about the highest quality on the market. Good enough for our boys in the Fleet, good enough for me!

T & B website link

This is the ground point for the lights themselves, on some of the structural support for the hood latch. The lights need a separate ground because they are mounted on a rubber resilient mount.





The 12VDC wire from the relay need to go to constant (battery) power. I simply ran it (inside of wire loom) up to the battery positive post, lugged it with the 14 gage, ¼ inch bolt hole lug and put it on the battery cable clamp bolt with a second nut.
The clamp bolt is a metric size and unfortunately, I have no idea what size it is. I just rummaged through my stash of nuts ands bolts until I found the right size. The bolt is roughly ¼ - 20 size, but it is metric.

Now we have to get into the cab with the switch wire. I chose to go “through” the grommet that the clutch cable goes through. I pushed aside the grommet with a Phillips screwdriver on the outboard side and forced the wire through this “hole”.
Many people use a straightened out coat hanger to make a hole to get wire into the cab from the engine compartment. Anything small and sharp will do if you choose to make a hole in the grommet.
By pushing the grommet to one side, I didn't need a hole and do not have an air leak into the cab. I just don’t like cold air on my feet!


Below is a pic of the loomed wire to the lights and to the battery all tied up nice and tight. The other wires you see that are not in a loom are from "professional" stereo installer types. I should have bitched!




I wanted to mount the switch on the radio bezel so it would be easy to reach. Removal of the radio bezel has been covered many times and will not be covered here.
The spot in the bezel that the 4 X 4 switch mounts in worked great for me, as I have a 2WD truck.
For those of you with 4 wheel drive trucks, you will need to find a different spot on the bezel or a different location entirely.

I used a 3/8 drill bit to drill the hole for the switch, it fit perfectly.
Locate the right spot to drill by looking at the back of the bezel, there are molded "ribs" that you will need to avoid.





The switch needs to have a ground and a power wire hooked to it, as well as the wire that came from the relay. This is to provide a circuit to light the LED. Any switch with a seperate indicator light will need to be set up the same way. The wiring method for using an unlit switch will be different and will not be covered here.

One terminal of the switch will need to go to ground and the other to constant 12VDC power. I simply spliced into the wires from the cigarette lighter for these. The center conductor of the lighter socket is 12VDC and the wire that connects to the PC police have been here terminal on the lighter socket is ground.

The next two pics are of the finished product. Note the black ABS stone guards that I bought separately from KC.





Reply With Quote
  #2  
Old 12-14-2009, 03:05 PM
BAMA BOY BAMA BOY is offline
I LOVE GASOLINE!!
 
Join Date: Oct 2009
Posts: 459
Default

where did you get that light bar?
__________________
2001 4.0l SOHC Ranger EDGE 2wd,Kenwood head unit,.Towing package, Cobra radar dector,Straight pipes, Black UWS Low Profile Tool Box,Air box mod,Throttle cable mod,Maxed T-Bars, Light Bar,



1964 Chevy C10 inline 6 granny 4 (play toy) painted in bedliner

Last edited by STL; 12-14-2009 at 03:08 PM.
Reply With Quote
  #3  
Old 12-14-2009, 03:07 PM
440volt 440volt is offline
Got Boost?
 
Join Date: May 2009
Posts: 16
Default

WAAG industries, They are out of production but now and then they will do a special group buy over on Generation-Edge.info
__________________
2003 Ex cab Edge, 3.0L, 5sp, 4:10 gears

Too many mods to list
Reply With Quote
  #4  
Old 12-14-2009, 03:08 PM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,399
Default

Company called WAAG
I don't think they make them anymore. I know they made some a couple years ago and that was the last I heard of them making them.
__________________
2005 Edge

Reply With Quote
  #5  
Old 12-14-2009, 03:14 PM
BAMA BOY BAMA BOY is offline
I LOVE GASOLINE!!
 
Join Date: Oct 2009
Posts: 459
Default

it almost looks like the push bars on police cars
__________________
2001 4.0l SOHC Ranger EDGE 2wd,Kenwood head unit,.Towing package, Cobra radar dector,Straight pipes, Black UWS Low Profile Tool Box,Air box mod,Throttle cable mod,Maxed T-Bars, Light Bar,



1964 Chevy C10 inline 6 granny 4 (play toy) painted in bedliner
Reply With Quote
  #6  
Old 12-16-2009, 06:24 PM
blackoutranger blackoutranger is offline
Liking the Ford Ranger Forum
 
Join Date: Dec 2009
Posts: 21
Default

i was just looking around and i found this light kit on amazon.com for like 117$ if any wants them this was the best price that i found i got mine from autoanything.com they were listed at like 135 and they refunded me the money diff with out any ? if you bought them with in a year just thought someone would like to know is someone finds them cheaper please let me know
__________________
2002 4.0l edge 4x4
torison keys turned 2"
2"blocks
brute froce cold air intake
32x11.50 bfg all terrains
15" black pacer bullet hole rims
panasonic radio pioner speakers all the way around
and a 375 watt on the door speakers
Power Acoustik OV2-600 Class A/B Gothic Series 600-Watt Amplifier on two sony 10" subs
and as any old country boy a good old CB radio
black brushguard rap around
2-6" black kc daylighters 130w
and back up lights
black spray in bed liner
Reply With Quote
  #7  
Old 12-17-2009, 02:14 AM
mb128 mb128 is offline
Member
 
Join Date: Oct 2009
Posts: 894
Default

u kind of went the hard way with it why didnt u hardwire it to a switch and to the battery?
__________________
Muddin in the ranger, killin ricers in the f350

95 ford ranger 3.0 v6 side step 5 speed 4x4
mods: 6" bds sus lift, 33x12.5r15 bfg km2, expo OHC/expo power seats, full length expo console, 2 1/2" flowmaster super 44 cat back, 4 procomp 5" offroad lights, clear headlights and turn signals, 6k hid kit, 25% tint (fronts)

PNW CREW


Quote:
Originally Posted by Yrac View Post
Its a truck, you wanna go fast? Money = Horsepower!
Reply With Quote
  #8  
Old 12-17-2009, 02:48 AM
Fx4wannabe01 Fx4wannabe01 is offline
Ford Ranger Driver
 
Join Date: Sep 2009
Posts: 4,197
Default

FWIW, even if banter shouldn't be in a how-to, there's actively been attempts at a new group order at RF...one about 8 months ago or so and another is starting again recently. But virtually nobody will front the cash requested by Waag and not enough people were interested in the group order.

The "sportster" bar was discontinued because it's a stand alone product. The new Waag bar allows for adding on a headlight grille to the existing main push bar. Cost of producing it makes it cheaper for the company, and it's upgradable for the customer. You can make it into a "grille guard" "cattle pusher" whatever the slang term is. TazDevil here has the new style Waag on her truck(believe it's in the classifieds now too).

/endhack.
__________________
'01 XLT disguised as a '03 Fx4 Level II.
Reply With Quote
  #9  
Old 12-17-2009, 03:00 AM
Fx4wannabe01 Fx4wannabe01 is offline
Ford Ranger Driver
 
Join Date: Sep 2009
Posts: 4,197
Default

Quote:
Originally Posted by mb128 View Post
u kind of went the hard way with it why didnt u hardwire it to a switch and to the battery?
Because running high draw items without relays is stupid and dangerous. Sure it's a couple dollars more in materials, but it's the SMART, RIGHT, and SAFE way to do it. Not the hackjob "this'll work" way. The truck won't end up like this...

__________________
'01 XLT disguised as a '03 Fx4 Level II.
Reply With Quote
  #10  
Old 12-17-2009, 01:41 PM
mb128 mb128 is offline
Member
 
Join Date: Oct 2009
Posts: 894
Default

my halagon fog lights are grounded to the frame and it goes from the battery to a fuse holder from a auto parts store and to the taggle i havnt had a problem besides a bad crimp but i fixed that
__________________
Muddin in the ranger, killin ricers in the f350

95 ford ranger 3.0 v6 side step 5 speed 4x4
mods: 6" bds sus lift, 33x12.5r15 bfg km2, expo OHC/expo power seats, full length expo console, 2 1/2" flowmaster super 44 cat back, 4 procomp 5" offroad lights, clear headlights and turn signals, 6k hid kit, 25% tint (fronts)

PNW CREW


Quote:
Originally Posted by Yrac View Post
Its a truck, you wanna go fast? Money = Horsepower!
Reply With Quote
  #11  
Old 12-21-2009, 01:06 AM
440volt 440volt is offline
Got Boost?
 
Join Date: May 2009
Posts: 16
Default

The reasons for a relay in the circuit are 1) It came with the kit (I had to replace it after about 3 years. $12 from KC.) 2)The current load is switched at the relay. The conductor (wire for you non electrician types) from the relay to the toggle switch can then be much smaller guage, and the toggle switch itself can vbe rated for fewer amps. Lower amperage switch = less $$$. 3) An electrical principal called voltage drop. If you take your digital multimeter (you should have one if you don't already) and measure the voltage at the battery, then with the aux ights on, measure the voltage at the light, you can see a difference. Sometimes not much, sometimes a lot. It depends on the guage of wire, the length of that wire, how may splices/ terminals may be in the circuit and the quality/ condition of the switch.
__________________
2003 Ex cab Edge, 3.0L, 5sp, 4:10 gears

Too many mods to list
Reply With Quote
  #12  
Old 12-21-2009, 01:26 AM
mb128 mb128 is offline
Member
 
Join Date: Oct 2009
Posts: 894
Default

so its not safe that i am running my fog lights how i am?
__________________
Muddin in the ranger, killin ricers in the f350

95 ford ranger 3.0 v6 side step 5 speed 4x4
mods: 6" bds sus lift, 33x12.5r15 bfg km2, expo OHC/expo power seats, full length expo console, 2 1/2" flowmaster super 44 cat back, 4 procomp 5" offroad lights, clear headlights and turn signals, 6k hid kit, 25% tint (fronts)

PNW CREW


Quote:
Originally Posted by Yrac View Post
Its a truck, you wanna go fast? Money = Horsepower!
Reply With Quote
  #13  
Old 12-22-2009, 04:13 PM
surfer03133 surfer03133 is offline
Dead Whales Everywhere!
 
Join Date: May 2009
Posts: 929
Send a message via Skype™ to surfer03133
Default

lol, id probably throw a relay in there if i were you just to be on the safe side. like said, its not that hard to add it
__________________
08 Ranger Sport 2wd
aFe CAI, 30x9.5.x15 Grabber AT2s, U/D pulleys, flowmaster super 44

"Those who make peaceful revolution impossible will make violent revolution inevitable."
- John F. Kennedy

"Somehow the "god of the athiests" delivers more miracles than all other religion combined than..."
Reply With Quote
  #14  
Old 12-22-2009, 04:24 PM
mb128 mb128 is offline
Member
 
Join Date: Oct 2009
Posts: 894
Default

it has a fuse hooked in to the live line wat would the relay do exactly?
__________________
Muddin in the ranger, killin ricers in the f350

95 ford ranger 3.0 v6 side step 5 speed 4x4
mods: 6" bds sus lift, 33x12.5r15 bfg km2, expo OHC/expo power seats, full length expo console, 2 1/2" flowmaster super 44 cat back, 4 procomp 5" offroad lights, clear headlights and turn signals, 6k hid kit, 25% tint (fronts)

PNW CREW


Quote:
Originally Posted by Yrac View Post
Its a truck, you wanna go fast? Money = Horsepower!
Reply With Quote
  #15  
Old 12-22-2009, 04:32 PM
Bird76Mojo Bird76Mojo is offline
troll extraordinaire
 
Join Date: Jun 2009
Posts: 635
Default

A relay is basically a switch for letting higher voltages flow by activating another lower amperage switch.

Google man, google...


GB
__________________
2001 Edge Regular cab, auto 4.0L 4x4 4.10LS 8.8

1987 standard cab w/92 5.0/T5Z 31 spline 8.8 w/Torsen

1989 Regular cab longbed, manual 2.9 4x4 - Parts BroncoII's x 3
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Instrument Cluster/Tail Lights/Fog Lights - NO Lights when Headlamps are on??? bwheeler Electrical Tech 8 06-18-2021 09:05 PM
Discuss How To: Install aftermarket back up lights STL How-To Submissions 10 02-21-2012 08:25 AM
How To: Install KC 130 Watt lights on a WAAG bar 440volt Exterior Guides 0 12-14-2009 02:17 PM
[SOLD] Waag Center Grille Guard TazDevil07 Exterior Parts 17 12-05-2009 06:58 AM
How To: Install aftermarket back up lights STL Exterior Guides 0 08-17-2009 05:18 PM