So this was the first time installing HIDs on any vehicle so I didn't want to take pictures but since there was really no tutorial on this forum on how to do this DIY project, I figured I would provide helpful links for those wanting to attempt this project.
Vehicle:
1999 Ford Ranger Stepside
HID Kit Used:
DDM HID Kit, 35W, 9007 High / Low, 6000K
Bulb Color: 6000K
Bulb Type: 9007/HB5 Hi/Lo Beam (+$20.00)
Wattage: 35 Watt
Item Number: DDM35W.9007HiLo.6000K
Bulb Removal:
http://www.carcarekiosk.com/video/19...ghts/headlight
HID Install (on a Mustang):
The wiring for the blue harness that will connect to the stock harness is exactly the same as the Mustang in the youtube video.
There was three main differences that I found from this video.
1. You do not need to remove the head light to get to the bulb. Follow the Bulb Removal Video above.
2. The DDM Tuning Bulb does not have the casing at time 2:08, so ignore that part.
3. When you are ready to install the HID Bulb, you need to install the HID bulb first before you install the black retaining ring.
One tough part was finding somewhere to put the ballasts...I probably didn't do the best job in placing it but it's secure and should be fine. Figured it didn't need to look perfect.
I think that's about it. Pretty straight forward. Started at 1:30pm and got done at 3pm. So just about 1 1/2 hours to do...and that's first time ever installing HIDs.
Let me know if you have any questions.