I tried this on my 07 and it didn't work on the passenger side, also the jumper (added from the turn signal) touched the wire I cut and now I don't have turn signals or hazards, HELP oh wise one

__________________
US Navy Sailor
2007 Ford Ranger XLT Supercab, 4.0L, 4x4 Auto Trans
Ready Lift 2" Leveling kit, 265/75/16 BFG All-Terrains

You have a blown fuse not a relay.

Did you use this to help? I was confused as well then saw this posted.

Is there a way to make this work on a 4th gen?

__________________
Brandon

2000 Ford ranger 4x4 steppie 3.0
Deep Wedgewood Blue
Cooper Discoverer AT'3 265/75/16

Thank you for the help, finding the right fuse panel was a pain. Now I know the passenger corner lamp is out.

__________________
US Navy Sailor
2007 Ford Ranger XLT Supercab, 4.0L, 4x4 Auto Trans
Ready Lift 2" Leveling kit, 265/75/16 BFG All-Terrains

Did this on my 2000 Ranger with LED's in blinkers and side markers must be right because when parking lights on markers blink when blinkers turned on but with out parking lights on side markers won't blink any one have any idea why.

__________________
2000 XLT Ext Cab 2door, 3.0 V6 Flex, 5 speed manual,2WD Kenwood aftermarket stereo Many mods planned just not able now on crutches for 8 more weeks

The simple blinker mod doesn't work correctly with LEDs because the voltage potential is reversed across the side marker lamps under certain conditions. LEDs are diodes and only allow significant current flow in one direction.

There is a fix for this but it requires additional wiring as explained here:

http://www.danielsternlighting.com/t...rkerflash.html

__________________
2003 FX4 Level II, Supercharged 5.0L V8, Headers, Duals
BW4406 manual transfer case, Aussie Locker, Torsen L/S, 4.10's
Bilstein 7100 rezzies, Cadillac/Mustang rear discs, Duff traction bars
Keypad Entry, Lock LEDs, ABS switch, sway bar discos
Heated seats, Explorer EATC, Trip Computer and consoles

2003 XLT 2.3L M5OD-R1 reg cab, 2011 Taurus SEL, 2016 C-MAX Energi Plug-in Hybrid

I got the DRL module as suggested in Daniel Sterns write up now my question is there is a set of directions that came with the module which stated that the blue wire goes to parking light feed and yellow to ignition for the DRL to work, in his write up for side markers to flash with turns it states yellow to turn signal feed red to turn signal, and brown to cut end of marker blue is not used. My question is if I just want the blinker mod should I use directions in write up. Sorry I am confused and sorry for long post. Thanks for any help.

__________________
2000 XLT Ext Cab 2door, 3.0 V6 Flex, 5 speed manual,2WD Kenwood aftermarket stereo Many mods planned just not able now on crutches for 8 more weeks

Ok. Here is my noob question.
Did anyone have to re-aim there headlights after removing them to do this mod?

__________________
Gold 05 xlt 4.0 auto 4x4.

My build thread
http://www.fordrangerforum.com/proje...build-log.html

Nope. You should not be turning the adjustment screws to remove the headlight housings.

__________________
2011 Ranger XLT 2WD - Dark Shadow Gray Metallic -- SOLD
- Richmond Gear, POWERTRAX No-Slip differential -- FOR SALE
- Advantage, Torza Hard Hat tonneau cover -- FOR SALE
2016 Ford Explorer - Shadow Black
2010 MINI Cooper - "Der Krautenküper"
1993 Special Service Package Mustang - The Five-O's 5-0.

That's what I thought.
Lights must have been out of alignment before I did it. Not sure how I didn't notice that before.
Blinker mod is sweet though!

05 xlt 4x4 auto, Aries grill guard, shield & deflectors, led tailgate light bar, tonneau, tbar crank, k&n air filter

__________________
Gold 05 xlt 4.0 auto 4x4.

My build thread
http://www.fordrangerforum.com/proje...build-log.html

I want to do this mod but I wanted to ask if anybody has done what I'm gonna try to do.. I want to make it so that when I turn on my driving lights both the corner lights and the stock turn signals turn on and when I turn on my turn signal only the corner light turns on and off. I hope you guys can understand what I'm trying to say haha

Seems like u want it to be setup like a motorcycle....bikes are that way...headlight and blinkers are on...in front..blinkers serve as a running light.

__________________
1999 Ranger 3.0FFV-ExtCab-4x4-My 99 Build
1998 Ranger 3.0-ExtCab-4x4-PROJECT TRUCK-My 98 Build

I did this mod, and usually run with my "parking lights" and fogs on, during the day.
This results in the effect you're looking for.

__________________
A Bad Day Fishing is Better Than a Good Day at Work

2003 RangerXLT Supercab 4.0SOHC/Auto 4x4. DWB.
Turn Signal Mod. Fog Light mod. ACC power mod. Rhino Lined bed. LED gauges.

Yeah pretty much haha

Just did this on my '02. Works awesomely.

__________________
2002 XLT 2WD 3.0