Re: How To: Reseal Ranger rear window 98-09
Great write up and detailing.
I've a 96 XLT Supercab with a single panel slider and the headliner gets wet - dripping wet - even when there's nothing but the morning's dew on the exterior of the truck.
I've already replaced the seal around the 3rd brake light and it still leaks. So, I'm going to be popping the rear window out and using that Windo-Weld to seal it back up.
At the same time however, I'd like to replace the rubber piece that surrounds the window on its outside. The rubber is showing its age and this'd be the time to do that replacement.
But, I'm having a helluva time even finding the replacement part described - let alone listed.
Near as I can tell, the thing is a single piece of rubber moulded to go around the outer edge of the window and frame the sliding panel in the center.
Any help here on what that piece is called, if it can be replaced without replacing the rear glass entirely, and where to get the thing would be greatly appreciated.
I've a green 2WD '96 XLT Supercab with a standard bed and the standard (i.e. weak) engine. It's my baby though and I'm pretty happy with it!