Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 08-24-2010, 09:31 PM
Clinton Clinton is offline
Banned
 
Join Date: Mar 2010
Posts: 14,046
Default Auto dim mirror install from an explorer

This is a HOW TO for installing an Explorer auto dim mirror. This mirror not only automatically dims from the car headlights behind you but it will turn on/off your headlight from day/night and it also has a timer on the bottom for your lights to be left on for a certain period of time when you step out of your vehicle after it is turned off. You do not need an OHC for this MOD, these are instructions for a truck with an OHC, only difference is the placement of one wire as you will see in the following.

Tools / items needed for installation:
  • Wire cutters and crimpers
  • 18 guage wire (I used 1 roll bought from Walmart)
  • crimp on butt connectors
  • crimp on quick disconnects
  • Wire taps
  • double sided tape
  • 2 SPST 30 amp relays (terminals marked 85,86,87 & 30)
  • Socket set
  • Electrical tape
  • Painters tape (optional but recommended to label wires)
  • Flathead screwdriver
  • Dremel (optional)

First off in this HOW TO you should follow all safety measures, when it comes to wiring and safety equipment.

YOU MUST DISCONNECT THE BATTERY BEFORE DOING ANYTHING!

First step:
Remove your old factory rear view mirror by placing a flat head screw driver underneath and lift GENTLY! The mirror will slide up and you can remove it from the windshield mount. Then mount your auto dim mirror to the mount bracket, adding the wire hide (covers the wires going from the mirror into the headliner). *NOTE: some of the plastic wire hides may have to be cut due to distance from the mirror to the headliner. I used a dremel with a cut off blade to cut it and file it even and smooth*

Second step:
Remove knee plate underneath steering wheel with your socket set, also removing hood latch. Then remove metal plate behind the knee plate. Also remove the dash bezel, unplugging the headlight switch plug and the interior light plug. Tuck away the interior light plug into the vent so it does not get in the way or mistakenly cut when splicing the headlight wires. Also remove the "A" pillar or "B" pillar trim (only 1 pillar needs to be removed, just depends on where you run your wires to) along with the kick plate underneath.

Take a look under the console for a good area to adhere the relays to so you know how much wire to run from your headlight switch to the relays

Third step:
(wires)
Pull headlight plug out for splicing.

WIRES COMING FROM MIRROR ITSELF:
1) White/pink wire (may look white/purple) This wire triggers the relay

- add more wire by crimping a butt connector, run it under the dash to pedals, when you get the wire to the pedals, add another butt connector, and splice two wires into the open end of the butt connector for the relays leave extra wire too and LABEL IT

2) Red/yellow wire (may look red/white) (12v constant,always hot)

- Use a wire tap, and tap it into the grey/yellow wire coming from OHC. If you do not have an OHC you can simply tap this wire into the green/orange wire from your dome light using 1 T-tap

3) There is a black/pink wire, Cut it and tape it off, you do not need it, its just a wire that auto dims the mirror when the truck is in reverse. I did not use this wire therefore I can not tell you where it goes because that function was unnecessary for me.

4) Solid black wire - (ground wire) Can be tapped into the ground of the OHC or add wire with a crimp on "O" ring connect and attach it to another ground found underneath the dash

Fourth Step:
HEADLIGHT SWITCH CUTTING AND SPLICING:
**There are some identical wires in this bundle, you will be splicing into the thick wires only, and YOU CAN NOT USE WIRE TAPS FOR THESE, YOU MUST USE BUTT CONNECTORS**

The "Y" splices should be made in the back of the butt connectors so they run behind your dash so it does not interfere with the main wire when pushed back in upon replacing the bezel.

1) Blue/orange wire (thick) cut it, splice it back together adding a "Y" connection at the splice, run the wire through dash down to the pedals, leave extra wire and LABEL IT!

2) Red/yellow wire (thick) cut and splice it back together adding a "Y" connection at the splice, run the wire through the dash down to the pedals, leave extra wire and LABEL IT!

3) Brown - Now they say brown, but it looked like a thick dark grey wire to me! Cut and splice it back together adding a "Y" connection at the splice, run the wire though the dash, down to the pedals, leave extra wire and LABEL IT

4) Tan/white wire - cut it, splice it back together adding a "Y" connection at the splice, run the wire though the dash down to the pedals, leave extra wire and LABEL IT



Fifth Step:
BUILDING THE RELAY WITH THE WIRES YOU HAVE LABELED:

First figure out where you will mount the relays under the dash, cut the wires to length, add quick disconnects to all wires you just ran MAKE SURE THE WIRES ARE STILL LABELED! Mark one relay headlamps, mark the other parking lamps, a simple "H" and "P" does the trick.

NOTE: Attach the relays together using double sided tape, making sure the relays are positioned the same way for easy mounting

1) The "Y" connection for the white/ pink wire attach one wire to terminal 85 of of "H" relay, attach the second wire to terminal 85 of the "P" relay.

2) Crimp 2 wires into a quick connect, plug that into terminal 86 of "H" relay, now you are left with 2 wires hanging from that connection. Add quick disconnect to one. Now attach one of those wires to terminal 86 of "P" relay. Then attach the other wire and the tan/white wire into a quick disconnect, then plug it into terminal 30 of the "p" relay

3) Brown wire - attaches to terminal 87 of the "P" relay

4) Blue/orange wire - attaches to terminal 87 of the "H" relay

5) Red/yellow wire - attaches to terminal 30 of the "H" relay


building the relays prior to installtion to save time and make sure the wires are labled for connection






Sixth Step:
Once you complete the wiring and all steps are checked to ensure proper connections are made, reconnect your battery, and plug in your headlight switch.

FIRST - start your truck, then turn on your headlights to make sure all connections are good and working properly, then turn off your headlights.

SECOND - Test your auto headlights by putting black tape over the sensor on the back of the mirror and to make sure the sensor works, cover the windshield with a blanket. Once the sensors are covered, your headlights and all your dash lights will turn on by themselves. If they do not, check your splicing and connections according to the above wiring steps.

Once you have established everything works properly, using the double sided tape again, mount your relays to the place you designated for them and MAKE SURE ALL CONNECTIONS ARE IN TACT. Then wrap all butt connections in electrical tape(optional)

Hide your wiring down the "A" or "B" pillar (whichever you ran the wires)
plug in your interior switch plug and put together your dash bezel, 2 knee plates, pillar trim and kick plates. Remove the blanket from the windshield and the black tape covering the sensor as well.

At the bottom of your mirror there is a delay slide which is the timer for your headlights to remain on once you turn your truck off. Set this timer at your preference.

Last edited by STL; 10-02-2011 at 06:38 AM.
Reply With Quote
  #2  
Old 08-25-2010, 05:06 AM
turbo turbo is offline
Rocket Scientist
 
Join Date: Oct 2009
Posts: 672
Send a message via AIM to turbo
Default Re: Auto dim mirror install from an explorer

Quote:
3) There is a black/pink wire, Cut it and tape it off, you do not need it, its just a wire that auto dims the mirror when the truck is in reverse. I did not use this wire therefore I can not tell you where it goes because that function was unnecessary for me.
The black/pink wire connects to the hot wire going back to your reverse lights (and can be found in the bundle of wires back by the transmission hump). The function is not to dim the mirror when in reverse, but to disable the dimming function when the truck is in reverse (so you can see better, to back up).
__________________
2001 Ranger XLT 4.0L SOHC
Silver Frost w/ Dark Graphite interior


Modifications
Summit 3" Body Lift
31x10.50 A/T tires
Explorer overhead console
Explorer auto-dim mirror
Explorer auto-headlights
Aux1 & Aux2 inputs on factory AM/FM/CD/Cassette
Door-dinger silencer button
Seamless retractable roof and passenger-side ejection seat with steering wheel mounted controls and safety interlock
Reply With Quote
  #3  
Old 08-31-2010, 05:20 AM
Clinton Clinton is offline
Banned
 
Join Date: Mar 2010
Posts: 14,046
Default Re: Auto dim mirror install from an explorer

Thank you! I didn't know where that got hooked up, I didn't really need that function either
Reply With Quote
  #4  
Old 08-31-2010, 05:35 AM
turbo turbo is offline
Rocket Scientist
 
Join Date: Oct 2009
Posts: 672
Send a message via AIM to turbo
Default Re: Auto dim mirror install from an explorer

...yeah, I didn't hook mine up, either. Then again, I rarely back up using the mirror, anyway...
__________________
2001 Ranger XLT 4.0L SOHC
Silver Frost w/ Dark Graphite interior


Modifications
Summit 3" Body Lift
31x10.50 A/T tires
Explorer overhead console
Explorer auto-dim mirror
Explorer auto-headlights
Aux1 & Aux2 inputs on factory AM/FM/CD/Cassette
Door-dinger silencer button
Seamless retractable roof and passenger-side ejection seat with steering wheel mounted controls and safety interlock
Reply With Quote
  #5  
Old 08-31-2010, 05:46 AM
Clinton Clinton is offline
Banned
 
Join Date: Mar 2010
Posts: 14,046
Default Re: Auto dim mirror install from an explorer

Quote:
Originally Posted by turbo View Post
...yeah, I didn't hook mine up, either. Then again, I rarely back up using the mirror, anyway...
Me either!
Reply With Quote
  #6  
Old 09-05-2010, 07:14 AM
Ranger01 Ranger01 is offline
Ford Ranger Driver
 
Join Date: Nov 2009
Posts: 2,402
Default Re: Auto dim mirror install from an explorer

GREATEST WRITE UP EVER!!!!!! I now have automatic Headlights!!!!!
__________________
2001 3.0 V6 Automatic "Police Interceptor"
4x4 Off-Road
3" Body Lift
Belltech 6400 Shackles
JBA Headers
LOKRITE Locker
COBRA disc conversion
Reply With Quote
  #7  
Old 09-05-2010, 09:31 AM
Clinton Clinton is offline
Banned
 
Join Date: Mar 2010
Posts: 14,046
Default Re: Auto dim mirror install from an explorer

Quote:
Originally Posted by Ranger01 View Post
GREATEST WRITE UP EVER!!!!!! I now have automatic Headlights!!!!!
Yeah One of my favorite mods!
Reply With Quote
  #8  
Old 09-26-2010, 11:28 AM
somidscr21 somidscr21 is offline
Buy a Ford
 
Join Date: Sep 2010
Posts: 194
Default Re: Auto dim mirror install from an explorer

Hey Clinton, I was looking at this again, getting ready to install my mirror. I was just wondering a couple of things though.

First, I don't have an OHC so I need to hook up the power to the Dome light, but I don't know where that wire is at all, do you?

Second, I don't really understand how to do the relays. I purchased the relays from you, but is there a way to run the wires into the box part of them or do I just wrap it around the pegs? Also, don't these need to be plugged in somewhere? How can I just put them anywhere?

Sorry for my ignorance, first time I've done car electrical outside of a head unit.

Thanks!
__________________
2003 Ranger 4Cyl 2.3L XL Styleside bed
Pioneer DEH-3100UB, Lund Genesis Tonneau, grill painted black, black front emblem, clear corners, ultra-guage, LED cluster.
Reply With Quote
  #9  
Old 09-26-2010, 11:50 AM
Clinton Clinton is offline
Banned
 
Join Date: Mar 2010
Posts: 14,046
Default Re: Auto dim mirror install from an explorer

no big deal man. Take your dome light out and run the wire under the headliner to it. Try using a rubber coated coat hanger to pull it through. Attach the wires to the relays using quick disconnects. crimp the quick disconnects to the end of the stripped wire then attach them at the designated location on the relays. Use double sided tape and stick the 2 relays together, than put the tape on a flat side of the relays and stick it to a clean spot under the dash. I put mine on the metal frame between the radio and steering colum, there should be a nice flat spot there to tape them to

Quick disconnects

Last edited by Clinton; 09-26-2010 at 11:56 AM.
Reply With Quote
  #10  
Old 09-27-2010, 12:56 AM
Fourliter Dan Fourliter Dan is offline
Ford Ranger Owner
 
Join Date: Sep 2010
Posts: 67
Default Re: Auto dim mirror install from an explorer

so if i just wanted to wire up the mirror without the auto head lights how would i go about that... i have both mirror and ohc (ohc is wierd).
__________________
is what it is
Reply With Quote
  #11  
Old 09-27-2010, 05:13 AM
Clinton Clinton is offline
Banned
 
Join Date: Mar 2010
Posts: 14,046
Default Re: Auto dim mirror install from an explorer

I believe just use the ground (black wire) and the red/yellow wire (may look red/white)
Reply With Quote
  #12  
Old 09-27-2010, 08:41 AM
somidscr21 somidscr21 is offline
Buy a Ford
 
Join Date: Sep 2010
Posts: 194
Default Re: Auto dim mirror install from an explorer

Alright I think I just had a Eureka moment and it all makes sense now, except for one thing. How do you splice a Y into a wire when just using a butt connector? Do I cut the wire then put one end of the original wire in one side then on the other do I put the other end of the original wire and the new wire into the butt connector?

This is the type of connector you are talking about correct?
http://www.jimruffi.com/images/shopp...connector2.JPG
__________________
2003 Ranger 4Cyl 2.3L XL Styleside bed
Pioneer DEH-3100UB, Lund Genesis Tonneau, grill painted black, black front emblem, clear corners, ultra-guage, LED cluster.
Reply With Quote
  #13  
Old 09-27-2010, 09:43 AM
Willieranger Willieranger is offline
willieranger
 
Join Date: Sep 2010
Posts: 4
Talking Re: Auto dim mirror install from an explorer

Quote:
Originally Posted by turbo View Post
The black/pink wire connects to the hot wire going back to your reverse lights (and can be found in the bundle of wires back by the transmission hump). The function is not to dim the mirror when in reverse, but to disable the dimming function when the truck is in reverse (so you can see better, to back up).
When I grow up I want to back up like you! No seriously, I do think that the middle mirror on my truck is basically for viewing only directly behind me, in other words, I rather use all the options i have on my side mirrors and maybe a camera for best viewing, I have a camper shell in my ranger and most of the time view is impaired directly behind me.
Reply With Quote
  #14  
Old 09-27-2010, 10:10 AM
Fourliter Dan Fourliter Dan is offline
Ford Ranger Owner
 
Join Date: Sep 2010
Posts: 67
Default Re: Auto dim mirror install from an explorer

Quote:
Originally Posted by somidscr21 View Post
Alright I think I just had a Eureka moment and it all makes sense now, except for one thing. How do you splice a Y into a wire when just using a butt connector? Do I cut the wire then put one end of the original wire in one side then on the other do I put the other end of the original wire and the new wire into the butt connector?

This is the type of connector you are talking about correct?
http://www.jimruffi.com/images/shopp...connector2.JPG
the link you showed is a but connector with heat shrink.

to be able to splice a wire there is a much easier way to do it, its called a T TAP. pertty simple, take the part that folds over and fold it into its self with the wire in the slot, then with the wire you are using to splice the existing wire to plug into the t tap. that easy.

here is what the package looks like.


and here is how you use it.
__________________
is what it is
Reply With Quote
  #15  
Old 09-27-2010, 10:21 AM
Clinton Clinton is offline
Banned
 
Join Date: Mar 2010
Posts: 14,046
Default Re: Auto dim mirror install from an explorer

Do not use T taps! These are primary wires, and it will short or burn using T taps! Sam I will send you a PM explaining the splice
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
[SOLD] Auto dim mirrors and 1 OHC Clinton Interior Parts 79 10-23-2010 10:27 PM
OHC, Visors & Auto dim mirror installed!! Clinton Vehicle Snapshots 4 08-16-2010 02:05 PM
auto dim mirror and power visor hookups? Clinton Interior Tech 5 08-15-2010 07:06 AM
Auto dim mirror wire Ranger01 Electrical Tech 6 04-12-2010 03:54 PM
Want to Buy: Explorer Auto Dim Mirror and 2004-UP Seats Ranger01 Interior Parts 3 11-30-2009 05:34 AM