|
01-08-2012, 02:35 PM
|
|
Some assembly required...
|
|
Join Date: Jun 2009
Posts: 921
|
|
Re: Auto dim mirror install from an explorer
Quote:
Originally Posted by HazardousRanger
Bob, can i refer you to post 161?
|
I read it but I don't understand what you are asking.
__________________
2003 FX4 Level II, Supercharged 5.0L V8, Headers, Duals
BW4406 manual transfer case, Aussie Locker, Torsen L/S, 4.10's
Bilstein 7100 rezzies, Cadillac/Mustang rear discs, Duff traction bars
Keypad Entry, Lock LEDs, ABS switch, sway bar discos
Heated seats, Explorer EATC, Trip Computer and consoles
2003 XLT 2.3L M5OD-R1 reg cab, 2011 Taurus SEL, 2016 C-MAX Energi Plug-in Hybrid
|
Register and never see these ads again. |
|
01-08-2012, 03:04 PM
|
|
;p
|
|
Join Date: Aug 2011
Posts: 2,689
|
|
Re: Auto dim mirror install from an explorer
He is wondering how to install an auto-dim mirror that has a temp gauge built into it. Something like the ones that come in Mazda 6's.
He was also wondering if you knew if the auto-dims like I just explained come with an auto-lamp feature.
To answer this last question, Eric, it is easy to tell if they do or not.
You'll be able to see a little tiny light sensor on the windshield/mount part (will actually be facing the windshield built into the mount) if it does have an auto-lamp feature.
__________________
2000 Ford Ranger XL 2.5L 5-speed RWD 3.73 open - 170,000+ miles
Buggman LED 3BL/CARGO, Buggman Stang Dome LED conversion, LED Brake Light conversion, Line-X O.T.R., Air silencer removed
2.3L Headgasket/TIMING/Water Pump replacement guide
|
01-08-2012, 08:18 PM
|
|
Some assembly required...
|
|
Join Date: Jun 2009
Posts: 921
|
|
Re: Auto dim mirror install from an explorer
Quote:
Originally Posted by 94mtx
He is wondering how to install an auto-dim mirror that has a temp gauge built into it. Something like the ones that come in Mazda 6's.
|
Best bet would be to get the factory wiring diagrams for the Ranger and also for the specific donor vehicle that supplied the mirror. After you have the color codes from the schematics, the wiring should be simple enough.
__________________
2003 FX4 Level II, Supercharged 5.0L V8, Headers, Duals
BW4406 manual transfer case, Aussie Locker, Torsen L/S, 4.10's
Bilstein 7100 rezzies, Cadillac/Mustang rear discs, Duff traction bars
Keypad Entry, Lock LEDs, ABS switch, sway bar discos
Heated seats, Explorer EATC, Trip Computer and consoles
2003 XLT 2.3L M5OD-R1 reg cab, 2011 Taurus SEL, 2016 C-MAX Energi Plug-in Hybrid
|
01-24-2012, 05:52 PM
|
|
GMC Driver now...
|
|
Join Date: Dec 2011
Posts: 147
|
|
Re: Auto dim mirror install from an explorer
Question, I installed my gentex-104 autolamp/autodim over the weekend, and my headlights are on all the time. Today, I turned the key on and the lights were not on until I covered the 2 sensors until they came on. I then uncovered them, and the lights turned off. I covered the sensors again until the lights turned on. Once I uncovered them, nadda. The lights stayed on. Does this mean my mirror is faulty? The auto dim is awesome just watching it dim! I LOVE autolamps!!
|
02-01-2012, 03:53 PM
|
|
GMC Driver now...
|
|
Join Date: Dec 2011
Posts: 147
|
|
Re: Auto dim mirror install from an explorer
I got it sorted. I bought another used Gentex-104 and plugged it in. That one functions for the most part "normally." At first it seemed the slider wasnt working by going the whole 3 minutes of timer. I popped the face off and it seemed the slider was not hooked up. After I put it all back together, I plugged it in and now my lights turn off about 30-45 seconds.
|
02-27-2012, 05:52 PM
|
Learning to use the forums
|
|
Join Date: Jan 2012
Posts: 7
|
|
Re: Auto dim mirror install from an explorer
Great write up Clinton. Thanks!
Got my Explorer mirror installed in my Ranger and it works great.
John
|
03-02-2012, 10:40 PM
|
Redneck Ranger
|
|
Join Date: Apr 2010
Posts: 17
|
|
Re: Auto dim mirror install from an explorer
can I get a diagram for 2010 using the 2 relays and preferably not done in crayon? lol. nothing against the diagram, I can follow it but i dont really want to use the nissan relay.
__________________
2010 4Cyl. Ext. cab. currently no modification
|
03-16-2012, 12:16 PM
|
Like the Forums
|
|
Join Date: Oct 2010
Posts: 41
|
|
Re: Auto dim mirror install from an explorer
Here you go!!!
2010 Headlight wire set-up with 2 relays.
__________________
99 Ranger Std. Cab,Auto 4speed, 2wd
Mods: Plug-n-play Auto-dimm, Retro-fit headlights, Might level/lift truck.Removable Ultra-gauge.
|
03-16-2012, 05:14 PM
|
|
Some assembly required...
|
|
Join Date: Jun 2009
Posts: 921
|
|
Re: Auto dim mirror install from an explorer
You might want to recheck the diagram. Configured as shown, the autolamps function won't work.
__________________
2003 FX4 Level II, Supercharged 5.0L V8, Headers, Duals
BW4406 manual transfer case, Aussie Locker, Torsen L/S, 4.10's
Bilstein 7100 rezzies, Cadillac/Mustang rear discs, Duff traction bars
Keypad Entry, Lock LEDs, ABS switch, sway bar discos
Heated seats, Explorer EATC, Trip Computer and consoles
2003 XLT 2.3L M5OD-R1 reg cab, 2011 Taurus SEL, 2016 C-MAX Energi Plug-in Hybrid
|
03-16-2012, 06:11 PM
|
Like the Forums
|
|
Join Date: Oct 2010
Posts: 41
|
|
Re: Auto dim mirror install from an explorer
On the relays 86 should be connected to Ground.
__________________
99 Ranger Std. Cab,Auto 4speed, 2wd
Mods: Plug-n-play Auto-dimm, Retro-fit headlights, Might level/lift truck.Removable Ultra-gauge.
|
03-16-2012, 06:42 PM
|
Like the Forums
|
|
Join Date: Oct 2010
Posts: 41
|
|
Re: Auto dim mirror install from an explorer
Rwenzing- Totally didn't know that the White/purple was the ground trigger. Will fix wiring diagram n post a new one.
----------
__________________
99 Ranger Std. Cab,Auto 4speed, 2wd
Mods: Plug-n-play Auto-dimm, Retro-fit headlights, Might level/lift truck.Removable Ultra-gauge.
|
05-19-2012, 10:36 AM
|
Learning to use the forums
|
|
Join Date: May 2012
Posts: 2
|
|
Re: Auto dim mirror install from an explorer
Hi
I am hoping someone might be able to help me and im lost otherwise. I have a 2008 Taurus and Im curious on if i can add this mirror to my car and get auto headlights. Heres what i know about my car, from the headlight switch all the wires go to the smart junction block and then the smart junction block turns on the lights. on the Taurus auto headlamp system the auto lamp switch wire goes to the SJB then the SJB receives the signal from the sun sensor which then tells the sjb to turn the lights on
Question is will the diagram displayed in this thread be used on a vehicle where the SJB controls the lights?
|
05-23-2012, 06:14 PM
|
Redneck Ranger
|
|
Join Date: Apr 2010
Posts: 17
|
|
All of the electronics are in the mirror. The wire running to the relay acts as a switch for the relays so it should work for your Taurus but the wire colors may be different, I've never worked on a Taurus so im not sure. Pull up the wiring schematics for both vehicles and match up which colored wires you need to splice into on your car
__________________
2010 4Cyl. Ext. cab. currently no modification
|
05-25-2012, 03:46 PM
|
Learning to use the forums
|
|
Join Date: May 2012
Posts: 2
|
|
Re: Auto dim mirror install from an explorer
Ok my headlight switch plug is just like the 2010 plug shown above but the wiring is different here's mine
1-GROUND
2-CNTRL MOD, IP SWITCH ILLUMINATION
3-RELAY FOG LAMPS
4-SWITCH AUTO LAMPS ON
5-SWITCH PARK LAMPS
6-SWITCH FOG LAMPS FRONT
7-GROUND
8-NOT USED
9-SWITCH HEADLAMP OFF
10-SWITCH BEAM LOW
so which wires would i hook to?
|
06-25-2012, 10:22 PM
|
|
Ford Pickup
|
|
Join Date: Feb 2011
Posts: 123
|
|
Re: Auto dim mirror install from an explorer
Is there a way to disable the ding ding ding sound?
__________________
1998 Toyota 4Runner Ltd. 2WD
3.4 V6, 4 speed auto, 263,200 miles, Evergreen Metallic, Bilstien 4600 HD Shocks, Sirius Stratus 6
Sold - 2000 Nissan Frontier CC SE 4x4
3.3L V6, 4 speed auto, 135,965 miles, Pioneer Headunit
SOLD - 2006 Ranger XLT
Built Date: 12/12/05~2WD~2.3 L DOHC 4 cyl.~4:10 Rear Axle~5 Speed Auto~104,010+ Miles
|
|
|