Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 12-04-2019, 11:26 AM
lay.bradley.6 lay.bradley.6 is offline
Learning to use the forums
 
Join Date: Dec 2019
Posts: 1
Default Question about Equipping turbo to 1994 2.3 lima

Bare with me here. So here's my question.

I only want about 7 psi of boost max. I don't want to swap out the ecu For a turbo coupe one. I was thinking I could just do this. Forged pistons, stock internals (which should be fine) , header off a merkurs or turbo coupe along will the turbo and 30 cc injectors. I'm not worried about the intercooler and the other things like that. My concern is can the stock ECU account for the extra air? Given that it's so far below normal boost levels I've read that it can. Also I'm not above getting the ecu tuned for my new specs and if I do that is there sensors I need to add or can I just go another route maybe something mechanical I can do?

What I'm trying to avoid is buying a turbo head, rewiring the ecu from a turbo car into my truck and going to a distributor and all that jazz. I'd rather just bolt it on with some fabricating here and there and upgrade the injectors and possibly the fuel pump if need be. THOUGHTS on this and is there a better way. Gotta be honest I just want a little better acceleration and the blow off valve noise lmao.

Sent from my moto e6 using Tapatalk
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Turbo 2.3 Lima Brolke 4-Cylinder Tech 2 07-20-2016 06:26 AM
4 cyl Lima turbo engine swap SaddleSore Other Engine Tech 7 08-31-2014 06:53 PM
1994 3.0 v6 turbo build TheIrishPhil 3.0 Vulcan Tech 7 09-18-2013 11:09 AM
Question about turbo joealex 4-Cylinder Tech 1 09-25-2010 10:47 AM
turbo question trgtshoot Other Engine Tech 2 08-08-2010 07:26 PM