1995 Ranger XLT, factory power locks, anti theft, the problem is the wiring plug on the passenger door are all connected to sensors, but not on the drivers door lock, only the courtesy plug and sensor are connected, BUT the blue plug and the other black plug are just hanging inside the door. I have a keyless entry fob, (three button remote with lock, unlock, and panic). I tried to enter the progamming mode cycling ignition 5 to 8 times and ending in run but the doors locks would not lock and unlock. they did approx a week ago when program was ran, now I notice my "THEFT" NOT flashing? ( AS STATED IT WAS WORKING ABOUT A WEEK AGO) Does anyone know if this has anything to do with the drivers door lock cylinder being changed out to one without anti theft ( I did not do this) plug hanging in the door was working before with out connected. Where is rap module located can it be reset I disconnect battery overnight and reconnect battery and start truck for twenty minutes PLEASE HELP
Thanks.
