Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 03-21-2010, 06:36 PM
mmguy mmguy is offline
Like the Forums
 
Join Date: Dec 2009
Posts: 47
Question Loose steering

Anyone,everyone
I have a 1996 2wd and I just replace the tierods in and out the shocks and the sway bar bushings and it line up.The steering is really loose.There is a hollow sound coming from the drivers side when you make turn.There are no control arms and the ball check out ok.So before I start looking at the gear box is there any thing else I should look at? What kind of job would it be to get the box out? Also if I go to a boneyard to get a box what do I look for and check to hopefully get a good one?
__________________
1996 Ranger XLT reg cab 2wd
2.3 and 5spd
3 inch PA body lift & new stock bushings
Flowmaster Delta 40 muffler
New 15 Outlaw wheels
No mods to the motor yet
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
shifter loose and hard to find gears TransAmFSAS Drivetrain Tech 8 12-10-2012 06:56 PM
sounds like theres something loose mrdadeink 2.9 Liter Tech 10 03-08-2010 02:20 AM
Loose wire somewhere wallyworld Electrical Tech 0 01-11-2010 07:50 PM
Rocker Arm bolts keep coming loose after torquing. ControversySELLS General Ford Ranger Discussion 15 01-11-2010 03:39 PM
loose e-Brake on Ford Ranger 2000 Model? D N General Ford Ranger Discussion 1 01-15-2009 11:15 AM