Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > Ford Ranger Technical > General Tech
Forgot Password? Join Us!


Reply
 
LinkBack Thread Tools Search this Thread

  #1  
Old 04-08-2013, 10:26 AM
Learning to use the forums
 
Join Date: Apr 2013
Posts: 1
Default 93 Ranger Ignition Switch Broken

I was hooking up my trailer and needed to be an inch forward and an inch to the left. I turned the wheels sharply to the right and pulled forward ever so slightly, shut it off and went to check the position(which hadn't changed enough, and went back to do it again. The wheels were still to the far right.
When I went to restart it, the key wouldn't turn, I turned the steering wheel a bit to relieve tension on the ignition switch, but it wasn't doing anything.
The key will turn back(farther than before) but not forward. Any ideas how to deal with this??

What I've read so far all says to replace the ignition the key must be on, and the wheels must be straight.
Thanks for any ideas you might offer
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
86 Ranger 2.3 EFI NEED HELP with Ignition Starter Switch Install bozo4ford General Tech 1 10-27-2012 01:59 PM
Ignition Switch Replacement-1993 Ranger Ollie Octopus Interior Tech 4 09-13-2012 06:25 PM
need a diagram for replacing a ignition switch in a 99 ranger 3.0 mclovin1872 Electrical Tech 5 11-21-2011 12:29 PM
91 Ranger Ignition Switch Problem Tjs 4-Cylinder Tech 3 09-02-2011 06:41 PM
1992 ranger ignition switch mtwong50 General Tech 3 02-22-2010 07:21 PM



Search Engine Friendly URLs by vBSEO 3.6.0 ©2011, Crawlability, Inc.