 |
 |
 |
|
#1
12-21-2012, 07:13 PM
|
|||
|
|||
heater valve
can anyone tell me where the valve is located that allows water to flow through the heater. My 88 don't heat up, and only one hose going to the heater gets warm. The fuse is good and theres juice at the fuse as well. Any ideas are much appreciated.
|
 |
 |
| Register and never see these ads again. | |
|
|
|
|
|
#2
12-21-2012, 07:38 PM
|
||||
|
||||
|
Re: heater valve
what year, what motor ? if only 1 of the two hoses is hot, thats the feed to the heater, the cold hose is the return from the heater. Follow the hot hose from the heater back and it should end at a valve with a cable attached that comes from the heater control on the dash.
__________________
2000 XLT 4 Door Super Cab 4X4 with off road pkg. Harvest Gold 3.0/auto /4.10/ 8.8L/S / Full power everything  mostly stock
|
|
|
 |
«
Previous Thread
|
Next Thread
»
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Heater control valve leaking again, too much pressure? | DeckedOut | 4-Cylinder Tech | 5 | 09-29-2013 01:57 AM |
| Overheating Heater control valve leaking | ferluna | 4.0 SOHC / 4.0 OHV Tech | 0 | 12-03-2012 08:46 PM |
| HELP! Coolant leaking from a heater control valve? PICS | zman7125 | 4.0 SOHC / 4.0 OHV Tech | 8 | 12-25-2011 06:51 AM |
| heater core coolant valve. | ranger pete | 3.0 Vulcan Tech | 2 | 11-29-2010 05:42 PM |
| Heater Control Valve on 2.5L | sheltonfilms | 4-Cylinder Tech | 12 | 10-11-2010 06:23 PM |
|
|
 |
|
|
 |
 |
 |
