Re: 99 ranger
Quote:
Originally Posted by pushtrk99
!999 ranger/4.0/4 x 4/auto-207k miles
My ranger will sometimes crank over well but not start-retrying it a few times will fire it right up like a new car--I changed the ign module under the dash since I thought that was the problem-I think it is probably in the ign switch on the steering column--Can any body shed some light on changing the switch on column--I hope it is a DO IT YOURSELF job--Thanks in advance Rich
|
Your ICM is part of the ECU. you changed the ignition switch......the lock cylinder just pops out. take the cover off then turn the key. a small ball bearing will pop out. push it in and pull the cylinder out....however, .I doubt that is your issue.............change your fuel filter, add some Techron to the tank and check the pressure with the 3 different tests....
__________________
2004 Ext Cab, 4WD, 4.0, Auto, 154k. (4.0 engine is out of a 2009 Ranger w/96k) ( as of 7/1/2017)
2004 Ranger, Ext Cab, 2WD, 3.0, 5 speed , 4WABS, crank windows, no cruise, Edge 116k.(6/5,2014) (SOLD).
1999 Ford Ranger, Reg Cab, 2.5, 5 speed, 2WD, no AC, 150k (SOLD).
Last edited by modelageek; 12-23-2012 at 10:42 AM.
|