Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > Ford Ranger Technical > General Tech
Forgot Password? Join Us!


Reply
 
LinkBack Thread Tools Search this Thread

  #1  
Old 02-10-2010, 04:38 PM
Learning to use the forums
 
Join Date: Feb 2010
Posts: 1
Default 1309 Code help

Hello,
I have a 2000 ranger that is now displaying a 1309 code. The head gasket failed and I had a head job done on the truck. After that was fixed I got the 1309 code, (misfire monitor disabled). The folks who did the head job told me it was the cam position sensor and they replaced it. Reset and the code returned. They then told me it was the cam synchronizer and that was a dealer only fix. I took it to a different mechanic and he checked the pcm for me and told me that is was the cam synchromizer also. I took it to a dealer and had the synchronizer replaced. Reset the codes and it's back again. Any suggestions?
Thanks in advance

Last edited by hunt4elk; 02-10-2010 at 04:40 PM.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Code 224 won't go away. kinda_fellin 4-Cylinder Tech 4 06-07-2012 05:39 PM
P0171 Code nrsoccer08 4.0 SOHC / 4.0 OHV Tech 8 02-01-2010 12:30 PM
code p1409 Brian863 3.0 Vulcan Tech 3 11-10-2009 12:51 PM
P0401 Code?? ranger88 3.0 Vulcan Tech 3 11-02-2009 09:19 AM



Search Engine Friendly URLs by vBSEO 3.6.0 ©2011, Crawlability, Inc.