Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 07-02-2012, 03:30 PM
redrangersaurus redrangersaurus is offline
Learning to use the forums
 
Join Date: Jul 2012
Posts: 5
Default Need a quote on some parts

Hi all, this will be my first post.

I am pretty sure that everyone here has their dream Ranger in their head and are working to get it. (i.e. brush guard, lift kit, winch) Well my dream Ranger is mildly down to earth and I need to know about how much it's going to run me. All I need the price of is a 3'' Body lift, Line-x bed liner, and a bull bar or Brush guard that has the capability of mounting a winch. Also, I saw one of my friends installed some form of adapter that went over the rotor of his Chevy S10 to give the tires a wider stance, if you could estimate that too I would appreciate it. Thanks everyone, and yes I have done some research on it but I would like some opinions...Rocket City Off-Road quoted me 850 Bucks for a 3'' lift. The kit is $230, should I attempt it?
__________________
2004 XLT FX4 Off-Road Tremor 4.0 Man Trans
Reply With Quote
  #2  
Old 07-02-2012, 03:41 PM
nelson22 nelson22 is offline
RIP Conner Miles
 
Join Date: Feb 2012
Posts: 645
Default

You can get a bl for less then that, like $150. Idk about installation. Line-x is about $400-$500 I think, I'm sure someone on here will correct me. The idk about but I would guess no more then a couple hundo
__________________
2000 Ford Ranger XLT 3.0 2WD (sold)

SE Minnesota
Quote:
Originally Posted by Fordzilla80 View Post
You didn't fall in love with the Subaru. Only lesbians fall in love with Subarus.
Quote:
Originally Posted by joshquade View Post
If it has tits or an engine it will give you problems.
Reply With Quote
  #3  
Old 07-02-2012, 03:55 PM
redrangersaurus redrangersaurus is offline
Learning to use the forums
 
Join Date: Jul 2012
Posts: 5
Default Re: Need a quote on some parts

I really appreciate the help and fast reply. I looked into it and like you said, BL's are actually kinda cheap. Now installing it is a different story. I have heard it done in 3 hours, and I have heard horror stories of it being impossible. Now, bear in mind I would still LIKE to use my front tow hooks and my rear receiver not to be too too low, but I could buy some new front hooks to mount. I can't weld and if that is what it is going to have to come down to, then I will just go without the tow hooks.
__________________
2004 XLT FX4 Off-Road Tremor 4.0 Man Trans
Reply With Quote
  #4  
Old 07-02-2012, 04:35 PM
Stinkbaitj Stinkbaitj is offline
potential sarcasm poster
 
Join Date: Nov 2011
Posts: 2,464
Default

Please post your truck info. But here is rough estimates




Body lift is $150-$300 depending on were you go and what you need(I.e. shifter extension for maunuals, bumper brackes to make up the gap difference when you lift the body) and you can do it yourself with a friend.

To get rid of the "rake" your truck has(front sits lower than back) depending on your truck you can do torsion bar cranks or your gonna need a 2 inch level kit and new shocks

For wheel spacers to bring your wheels out are abour $130 for four and I would go more than 2 inches.

Bull guards do not come with winches from what I have seen. Want a front bumper with a winch is gonna be a aftermarket thing if you want it done right. Cost around $400-$800 I think and it takes care of your bullbar and winch situation.

----Ford Ranger Owner----
__________________
1993 ford ranger 3.0 v6

Last edited by Stinkbaitj; 07-02-2012 at 04:40 PM.
Reply With Quote
  #5  
Old 07-02-2012, 04:40 PM
redrangersaurus redrangersaurus is offline
Learning to use the forums
 
Join Date: Jul 2012
Posts: 5
Default Re: Need a quote on some parts

I appreciate all the help. But even though this does solve my bumper/winch problem, What about the tow hooks? I would really like to have some and I would hate to have to cut my bumper to make them work. I have a manual transmission so I would need a transmission extender, Idk much about the bumper, all I know is that I'd like to have the tow hooks.

EDIT: And since I have no means of making, fabing, or welding tow hooks or anything like it, I would be willing to buy some tow hooks that are made for my truck with the 3'' lift on it, if they exist?
__________________
2004 XLT FX4 Off-Road Tremor 4.0 Man Trans

Last edited by redrangersaurus; 07-02-2012 at 04:41 PM. Reason: Left something out
Reply With Quote
  #6  
Old 07-02-2012, 04:52 PM
doyouquaxu doyouquaxu is offline
Almost ******
 
Join Date: Mar 2011
Posts: 7,480
Default Re: Need a quote on some parts

www.google.com
www.summitracing.com

"body lift"
"wheel spacers"
"bull bar"
"line-x alabama"
__________________
Why does everyone think prerunners just jump stuff?


Please click HERE to watch this video!
Reply With Quote
  #7  
Old 07-02-2012, 05:43 PM
Terry Slaney Terry Slaney is offline
Ford Pickup
 
Join Date: Oct 2011
Posts: 124
Default Re: Need a quote on some parts

just go ahead and get a custom bumper, you can have all the tow hooks you want a nice spot to mount the winch.
__________________
2003 Ford Ranger 4x4
4.0L, 5 speed standard, Reg cab stepside

SAS'd, waggy 44, Ford 8.8, eLocker & Lunchbox locker, 5.13's
Reply With Quote
Reply

Tags
estimate, part list, parts, price

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
What your movie favorite quote? Hickfromhell88 Laugh Factory 324 07-29-2014 08:48 AM
What's your favorite quote? richarddhoward Off Topic 55 07-06-2013 01:25 PM
favorite movie quote FoMoCo Off Topic 36 04-15-2013 12:42 PM
reupholster stock 01 ranger seats quote? Zable Interior Tech 9 05-08-2011 02:09 PM
Little Quote I Came Up With stephen.g.fiddes Photography 12 09-26-2010 09:05 PM