Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 02-10-2009, 09:56 PM
george george is offline
Learning to use the forums
Join Date: Feb 2009
Posts: 1
Default 97 Ranger Power Steering

Does anyone know the torque spec on the pressure line at the pump outlet? I have replaced the flexable pressure line twice and eventually find a leak. Initially upon startup there are no visable leaks, but after some time and miles the teflon ring or plastic seal (on the hose fitting) seems to pucker or blow (push) out slightly and leak. I must either be under or over tightening. Or is there a known issue with these special Ford hose fittings?
Reply With Quote
Old 02-12-2009, 06:06 PM
98blownranger 98blownranger is offline
Custom KeyChain R Me
Join Date: Feb 2009
Posts: 718

just make them tight, it is a hard one to reach the seal should hold the pressure back. I just did my explorer and no problems, I replaced the whole rack also. on the exp the rack is inside the frame. a whole day of fun

Originally Posted by redrumedge View Post
98blown you should be an MD! that's the same stuff my doc asks and ur spot on man!!!
98 4.0 2wd-----supercharger fully build heads cam...all show with go......3 time world of wheels champ 5 time national winner

lots of ranger parts for sale leftovers from my 94/96
96 sitting on the frame, waiting to go lower

custom billet parts by me intake adapters and billet steps for the step sides

please sign my guestbook!!
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Power Steering '97 4.0 V6 pmadill General Tech 2 05-20-2009 01:54 PM
Will a steering column from an 83 4x4 fit my 88 2wd? islandman81 General Tech 1 02-21-2009 01:00 PM
1993 ford ranger power steering fluid ? guitarplayer574 General Ford Ranger Discussion 2 12-03-2008 07:50 PM