Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 01-22-2012, 11:43 AM
macx macx is offline
Like the Forums
 
Join Date: Nov 2011
Posts: 34
Default Shouldn't EGR vac solenoid seal against vacuum?

Been chasing a vacuum leak, vacuum is steady but 2+ pounds low in most situations.
Checking anything and everything that has vacuum to/thru it.

Found one - the plastic fitting going into the brake booster had a crack in it.
Was able to suck air thru the crack quite easily when sealing the other end
with my finger, and that's on probly the biggest vacuum line from the engine.

Haven't run it yet to see if it makes any diff on the vacuum gauge.

When I checked the EGR vacuum solenoid I found I was able to suck air
thru it fairly easily from the nipple that hooks to engine vacuum. When I
blow thru that nipple I can hear the solenoid valve inside unseat and I can
blow thru it easily.

Does that valve seal when voltage is applied, or do I have a leaker that needs
to be replaced?

Thx!
macx is online now Add to macx's Reputation Report Post
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Some pepole shouldn't be allowed to buy/drive Trucks... Pasco08 Off Topic 63 11-07-2011 09:16 PM
Should I or shouldn't change my OEM speakers Rango88 Audio / Video 34 05-18-2011 08:58 PM
Installing 1989 dual solenoid A4LD in place of single solenoid A4LD in 1986 Ranger daddyd Drivetrain Tech 0 03-12-2011 03:24 PM
lock up solenoid??? RoseCityRanger 4.0 SOHC / 4.0 OHV Tech 5 02-16-2011 06:56 PM
Please Help - Starter Solenoid nxr325 4.0 SOHC / 4.0 OHV Tech 2 08-10-2010 11:45 AM