Are any Ford rear (slider) windows compatible with my '97 B4000? Meanwhile, I have an ugly sliding plexiglass panel in place of a broken (2 piece) slider pane.

So far, I found that all underneath parts (bumpers, steering, drivetrain, suspension, brakes, electrical connectors, radio, fuel-filler-pipe) are all interchangeable. I read that only the body & trim are different, which kinda makes sense.

__________________
1997 4x4 Mazda B4000 SE, Ext.Cab

Looks good man, Thanks

__________________
1994 "prostreet" b2300
302 roller motor, e cam, gt40p heads, holley carb. c6 trans, 3500 stall. Narrowed 9" 456 gear. ladder bar coil over rear suspension. Drop bars, rack and pinion front suspension.

Ford made the b series for Mazda in the door jame it says made by ford for Mazda

__________________
Jim Petrucci

here are the pics of the wreck.

__________________
1994 "prostreet" b2300
302 roller motor, e cam, gt40p heads, holley carb. c6 trans, 3500 stall. Narrowed 9" 456 gear. ladder bar coil over rear suspension. Drop bars, rack and pinion front suspension.

You could always buy newer mine is a 2000 and I put 2001 parts on it. My opinion it looks better.

__________________
2000 Mazda B3000 SE 3.0l V6 flex fuel. Complete Rockford system. Work in progress.

my head is spinning again. my friend in ga just told me that the grill headlights etc etc from a 98+ ranger will fit my 94 mazda. ive been looking closer at the 98+ rangers and it looks like it may just fit. anyone know? i like the look of the grille on my 94 b but the headlights are fugly with 0 aftermarket choices

__________________
1994 "prostreet" b2300
302 roller motor, e cam, gt40p heads, holley carb. c6 trans, 3500 stall. Narrowed 9" 456 gear. ladder bar coil over rear suspension. Drop bars, rack and pinion front suspension.

They will but you need to put in a new core support

Sent from my HTC One X using FRF App so you can hate on my F150 no matter where I am

__________________
2021 F150 5.0 Screw

Past:18 F150 2.7, 16 F150 5.0, 14 F150 5.0, 07 F150 5.4, 03 Ranger 4.0

Master Certified Ford Parts / Warranty Admin

I put a 99 front end on my 96 and used the 96 rad support , the support needs to be trimed for the headlights and you need to make a bracket for the hood latch ,

__________________
2003 Ranger totally stock for now ,mods coming soon .
SOLD 1996 Mazda B3000

my hood latch is gone anyways, i think i may have to truy this while the motor is out.
Thanks, Skip

----------

mazdaman, did you keep the mazda fenders? i'm really fond of them.

__________________
1994 "prostreet" b2300
302 roller motor, e cam, gt40p heads, holley carb. c6 trans, 3500 stall. Narrowed 9" 456 gear. ladder bar coil over rear suspension. Drop bars, rack and pinion front suspension.

No, they were rotted out from rust .

__________________
2003 Ranger totally stock for now ,mods coming soon .
SOLD 1996 Mazda B3000

you stiill have the mazda hood /bumper?

__________________
1994 "prostreet" b2300
302 roller motor, e cam, gt40p heads, holley carb. c6 trans, 3500 stall. Narrowed 9" 456 gear. ladder bar coil over rear suspension. Drop bars, rack and pinion front suspension.

no , I have a 99 hood and fenders and a 2002 front bumper , the bumper took a bit of work to fit , still isnt the best but when it get ready to paint I will fit the bumper better

__________________
2003 Ranger totally stock for now ,mods coming soon .
SOLD 1996 Mazda B3000

thanks, I really dont want to change hoods

__________________
1994 "prostreet" b2300
302 roller motor, e cam, gt40p heads, holley carb. c6 trans, 3500 stall. Narrowed 9" 456 gear. ladder bar coil over rear suspension. Drop bars, rack and pinion front suspension.

Could I keep my ranger grill and lights and put mazda fenders on I'm puttin the more styled Mazda bed onbut will the fenders fit

__________________

Ranger and b series inner door panels swap out, my buddy put mazda door panels in his 99.

__________________
97' Ranger 2.3 2WD Auto